Six ways to protect an industrial network from malware

Malware can go undetected for months and even years inside an industrial network. Companies can protect themselves by educating their workers and ensuring their firewalls are configured properly.

11/19/2017


Companies constantly have to be aware of malware lurking in their industrial network, lurking and learning about is happening on a daily basis before it initiates an attack. Malware attacks can go undetected for months and even years.

"There's a concerning trend in these supply chain attacks," said Craig Williams, the head of Cisco's Talos team. "Attackers are realizing that if they find these soft targets, companies without a lot of security practices, they can hijack that customer base and use it as their own malware install base...And the more we see it, the more attackers will be attracted to it."

The longer your network is exposed, the higher the chance of falling victim to a malware attack. Companies can protect their network following these six steps:

  1. Network education. The first priority for companies is to know what's on your network in real-time, at all times from end-to-end.
  2. Create a maintenance program. Fix broken and misconfigured devices and damaged cables. Set up a regular repair and maintenance program.
  3. Restrict user-owned devices like routers and Wi-Fi links. Companies need to have specific procedures and strict policies in place to manage it. This will make it easier to find the crack in the system and prevent further damage.
  4. Make sure firewalls are properly configured. Place firewalls between segments of your network, and make sure they are all configured properly. Be vigilant with the application of new technology as firewall hardware is becoming more intelligent. We also suggest whitelisting on email firewalls to eliminate spam and phishing schemes.
  5. Consider edge-device firewalls. Edge-device firewalls are important when the company has a significant numbers of user input devices such as human-machine interfaces (HMIs) and programmable logic controllers (PLCs).
  6. Engage in regular social engineering. All of what has gone before is well and good, but if you don't engage in training your users, they will begin to slide.

This content originally appeared on ISSSource.com. ISSSource is a CFE Media content partner. Edited by Chris Vavra, production editor, CFE Media, cvavra@cfemedia.com.

ONLINE extra

See related stories from ISSSource linked below.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me