Six Sigma payoff: Lift-truck maker raises $1.5-million savings from green-belt, black-belt programs

For electric lift truck maker Crown Equipment, an investment in Six Sigma is credited with saving the company some $1.5 million. Read here how the savings continue to mount.

01/20/2009



At New Bremen, Ohio-based electric lift truck maker Crown Equipment ,

“While we looked for lean initiatives to drive efficiency improvements, we saw Six Sigma very much as a way of cutting the costs of nonconformance,” he notes. “The majority of the savings

The Six Sigma program began in October-November 2005, and commenced with Crown’s business unit managers being asked to nominate individuals to receive Green Belt and Black Belt training. Drawn

Primarily delivered by trainers from Milwaukee-based American Society for Quality (ASQ), Green Belt training came first.

"Black Belt" training—targeted to


Mark DeGrandchamp, director of quality and Lean/Six Sigma at Crown Equipment Corp., says the size of the company’s quality initiatives has decreased since Crown adopted Six Sigma principles.

Going forward, explains DeGrandchamp, Crown’s future plans for Six Sigma will be influenced by its experience generating the achieved savings. Somewhat counter to initial expectations, for instance, has been the finding that the bulk of the $1.5 million of savings has come from Green Belt activities, with Black Belt-driven improvement activities yielding less than $300,000. The problem: Black Belts weren’t assigned to their projects full time, and progress slipped.

The plan now, says DeGrandchamp, is for Crown to appoint an internally recruited Master Black Belt—partly to drive progress, but mostly to provide training, as well as support Six Sigma activities in areas like statistical analysis.

Interestingly, too, the primary focus of Crown’s Six Sigma activities will be at Green Belt level, not Black Belt.

“What we’re seeing is that the more we get into this, the more we find that there are fewer big nonconformance challenges for us to tackle,” says DeGrandchamp. “We’re seeing $15,000-$50,000 projects, and not projects of $100,000 upwards.”

Accordingly, he explains, Crown intends to increase the number of Green Belts in its plants, while holding the number of Black Belts constant.

“The first wave of Black Belts pretty much wiped out the big complex projects: What’s left are projects that are shorter‘quick hits’, and a lot less complex,” he says.

It’s a pattern that’s very familiar to Ron Atkinson, a former ASQ

“When you first start a continuous-improvement initiative, it’s common to find quite complex problems that are relatively easy to solve with the right tools—and Six Sigma provides the right tools,” he explains. “These are problems that might have been right in front of people for years, staring them in face. And suddenly, their number starts to diminish.”

While Green Belt problems continue to arise, prompting—as at Crown—continued investment in Green Belt training, the trick with Black Belt skills, he suggests, is to throw them at businesswide projects—not just manufacturing quality issues.

“Get input from the CEO,” he urges. “Get the answer to the question:‘What would you like to change if you could?’—and then go tackle that.”





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me