Simplified tax code helps small manufacturers

NTMA member Sam Griffith testifies before House committee looking at tax system overhaul

04/11/2013


In testimony April 10 before the U.S. House Committee on Small Business, a manufacturer and member of the National Tooling and Machining Association called for a simplified tax code that benefitted small businesses.

Sam Griffith, president and CEO of National Jet Company in LaVale, Md., said the nation needed “a reformed tax code that encourages manufacturing in America and helps our small businesses compete globally in the 21st century.”  Griffith, an NTMA member, testified before a hearing on “Small Business Tax Reform: Growth Through Simplicity.”

In 1992, Griffith purchased National Jet, a precision micro drilling technology company serving the aerospace, automotive, electrical, medical, and textile industries.  National Jet is structured as a subchapter S Corporation, meaning all income flows into Griffith’s personal tax return.  The company has 24 employees and has added two new employees in the last four months.

“The National Tooling and Machining Association and I wholeheartedly support tax reform that includes real reform for both C Corporations and pass-through companies, which make up the majority of small businesses in this country,” Griffith told the committee. “We desperately need lower rates, simplification of rules and elimination of the sunset provisions in the tax code to allow us to compete globally. It is very difficult to plan into the future when there is such uncertainty in the tax code. No one likes a moving target, and for the last 10 years it has been a nightmare to plan.

“We recognize that policymakers face many difficult decisions ahead in reforming the tax code,” Griffith added. “You will have to decide which deductions and credits you will eliminate or keep in place. However, to remain globally competitive, small businesses use several credits and deductions to free up resources to reinvest back in our business.  While each year is different, in 2010, National Jet Company reinvested 137% of our net income into the company and in 2011 we reinvested 112% back into the company.

“Our greatest concern is a seeming obsession with corporate-only tax reform—a path which leaves America’s small businesses and 81% of U.S. manufacturers behind. I believe we must develop a reformed tax code which encourages manufacturing in America and helps our small businesses compete globally in the 21st Century. We have a stake in this great country and we want our voice heard.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me