Sidney Hill, Jr.: The next planning variable may be carbon control

Constraint-based planning is a basic tenet of supply chain management. It calls for identifying factors that can slow the movement of goods through a supply network and developing solutions to overcome those limitations, or constraints, as they are called in supply chain vernacular. Typically, the goal is ensuring that all customer orders are filled correctly, on time, and at a cost that allows...

06/01/2008


Constraint-based planning is a basic tenet of supply chain management. It calls for identifying factors that can slow the movement of goods through a supply network and developing solutions to overcome those limitations, or constraints, as they are called in supply chain vernacular.

Typically, the goal is ensuring that all customer orders are filled correctly, on time, and at a cost that allows the company to turn a profit.

Supply chain professionals—with much help from software vendors—have become adept at managing constraints such as shortages of production equipment, raw materials, or personnel.

Given the growing concern about how the mass production and movement of goods is affecting the environment, we may be approaching a time when the amount of carbon emitted during the course of filling orders may become a standard planning variable.

LogicTools, a division of ILOG, says it is making this possible with the recent addition of a Carbon Footprint Extension to its ILOG LogicNet Plus XE supply chain software suite.

LogicNet Plus is used for designing supply chain networks as well as planning the best methods of moving goods through those networks. Both tasks involve weighing the trade-offs required to maintain certain customer service levels within a reasonable cost structure. With the Carbon Footprint Extension, the amount of carbon emitted can now become part of that analysis.

David Simchi-Levi, cofounder of LogicTools and now an ILOG consultant, says companies in the European Union, which has agreed to abide by the Kyoto Protocol for reducing greenhouse gases, already have a financial incentive for deploying tools like the Carbon Footprint Extension.

“Companies that can show their carbon emissions are below the limits [set by the Kyoto Protocol] can sell emission credits on the open market to companies above the limits,” Simchi-Levi says. “The market for those credits was 40 billion euros in 2007.”

The LogicNet extension has a database stocked with information such as the average amount of carbon emitted by buildings of various sizes, performing different types of production, in different geographic regions.

Data on the amount of electricity consumed in these buildings also is available, along with information on how much carbon would be emitted transporting the goods produced in the buildings to various points around the world.

Simchi-Levi says LogicTools gathered this data from U.S. government sources and the World Resources Institute. “It will be updated with each new release of the software,” he says, adding that the sources of all data are available to users, allowing them to seek more current information at any time.

The pertinent carbon-related data can be added to a LogicNet Plus planning model, where tradeoffs can be made.

“You can create an optimal supply chain strategy that keeps you below government-mandated emissions limits,” Simchi-Levi says. “Or, you can decide to go over those limits and buy emissions credits from other companies.”

Either way, you are exercising environmental awareness.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me