Should a professional tolerate mediocrity?

The answer may be yes or no. Yes, because we sometimes have no choice. And no, because mediocrity always lowers the high standards the company is trying to develop and sustain.

03/01/1998


The answer may be yes or no. Yes, because we sometimes have no choice. And no, because mediocrity always lowers the high standards the company is trying to develop and sustain.

So how should a pro deal with Mary Mediocrity and Joe Marginal? It hinges on the job they hold, their effect on departmental performance, and their influence on the rest of the staff. It also depends on how you define mediocrity. Let's say it breaks down into three classes: A -- average, B -- slightly below average, and C -- well below average.

The C guy is easiest to dispose of. The faster you get rid of him, the better for everyone. Permitting a C producer to remain will undermine the initiative of your good people, promote inefficiency and turnover, and inevitably lower departmental standards.

What about the A guy who's average, and his B compatriot who's a tad below average? There are no hard and fast rules, as Project Leader Ben Walden learned the hard way.

Evaluating his group while planning job assignments, he wrestled with the problem of two engineers in particular. One, a key engineer rated A, we'll call Harry; the other, John, rated B, held a more mundane job.

Harry's performance was steady, but uninspiring; John's was a notch or two below Harry's. Uncertain how to deal with them, whether to change their jobs, or let them go altogether, Walden wisely decided to seek his boss' advice.

Question : If you were Walden's boss, what counsel would you give him?

Cole's response: "The way I see it," Plant Engineer George Cole replied, "the old adage of the rotten apple spoiling the barrel seems to apply here. It's more important to deal with Harry at this point. Since John's work is routine, his influence on coworkers is minimal. It might be worth your effort to bring his performance up a notch.

"Harry is another kettle of fish. A key man in the group, his impact on others is significant. In Harry's job, mediocrity is unacceptable. A key employee should be a star. If you can't turn him into one in a hurry, I suggest a transfer out of the group, or let him go."





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me