Shift to full-service, facility-related outsourcing steadily increasing, survey finds

11/03/2006


Facility managers remain confident in the ability to save money and improve quality through the use of outsourcing, according to “An Inside Look at FM Outsourcing,” a new research report from the International Facility Management Association.

Companies are outsourcing with greater frequency today, hiring full-service vendors to provide many functions. Fifteen percent of the respondents’ companies now outsource, up from 3% in 1993. Two in five companies have brought services back in-house after outsourcing the service. Typically, the reasons are to regain control of the service, either in terms of cost, quality or response time.

The use of out-tasking, hiring individual specialized vendors to provide one or more services, has decreased from 91% in 1993 to 77% in 2006. The steepest decline has come in the past seven years.

The report, based on survey responses from 487 of the association’s members, also revealed that most facility managers believe that outsourcing can be the answer if they find the right service provider.

“We’ve seen outsourcing evolve into an accepted practice in running a facility management operation,” said Shari Epstein, associate director of research for IFMA. “More facilities are opting to establish longer-term contracts with full-service providers or reduce the number of contractors.

“Although outsource providers would like to build upon their relationship with existing clients, it’s difficult due to lack of communication and information offered by the client company,” Epstein continued. “One of the many challenges for a company and its employees is to develop a level of comfort and trust and let go of the day-to-day details of running a facility.”

One-half of companies have consolidated their vendor base to use fewer service providers during the past five years. The result is that for nearly one-half of companies, service providers are in a position of receiving substantially larger contracts than just two to five years ago.

More than one-half of companies have also saved money through outsourcing/out-tasking, and one-third have seen a quality improvement. These results are consistent regardless of whether the company is outsourcing or out-tasking.

Architectural, engineering and interior design services were outsourced with the most frequency, with 90% of respondents reporting that they outsourced these services. Those were followed by housekeeping services with 77%, property appraisals with 72% and roads, parking and garage maintenance with 70%. The largest growth among outsourced services between 1993 and 2006 was in the outsourcing of utility system maintenance, with a growth of 23%.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me