Seminar to present case studies of Green building energy performance

When it comes to high-performance buildings, the proof is performance. Measuring actual energy performance, however, can be challenging.

11/30/2007


When it comes to high-performance buildings, the proof is performance.
Measuring actual energy performance, however, can be challenging due to inadequate modeling practices, failure to include operations staff in goal setting, and lack of adequate budgets for commissioning, evaluations and ongoing benchmarking.
“As more actual energy performance data become available on high-performing buildings, clearer and more realistic expectations will help establish confidence within the building design and construction industry about costs and savings,” said Donald Winston, The Durst Organization, New York.
Winston is one of three speakers who will provide a look at the role of performance measurement in high-performing buildings presented in a seminar at ASHRAE ’s 2008 Winter Meeting, to be held Jan. 19-23 in New York. The seminar, Green Building Energy Performance: Some Experience and Data from the Field, takes place from 9:15-10:45 a.m. Jan. 23 at the New York Hilton.
Winston will focus on his experiences with Class A office space in midtown Manhattan, including the Conde Nast Building at 4 Times Square and recent high-rise green residential buildings. His experiences with this building also are featured in High Performing Buildings magazine.
“Energy cost savings are often cited as offsetting any additional first costs of green buildings,” said Adam Hinge, a member of ASHRAE’s Technical Committee TC 7.6, Systems Energy Utilization, which is sponsoring the seminar. “Many times the cited energy benefits are based on predicted, not measured, savings. In some cases actual energy performance can be quite different from predicted performance. Accurate reporting of the actual performance of green buildings is important, as sharing operating results and lessons learned earlier rather than later can avoid repeating potential mistakes as the green buildings movement proceeds. This seminar presents experience and data on several high-profile projects.”
Click here for more information.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me