Security first; not in smart grid

Development and deployment of smart-grid technology such as intelligent electric meters has outpaced security, setting up a “delicate dance with risk,” said the head of the industry advisory group EnergySec.

04/30/2012


“We’re not going to stop the roll-out of the technology, so what do we do when things go wrong?” said EnergySec Chief Executive Patrick Miller. “We’ve got to try to find ways to implement new options in measurement and repair,” that will allow rapid response to failures and breaches.

Miller said installation of equipment already is under way and slowing down to wait for security to catch up is not an option.

“The hackers will outpace that technology,” he said. But risk must undergo intelligent management. “Hope is not a strategy. You should go into this knowing the risks,” and with plans to mitigate and respond to it.

Miller made his comments in the wake of a survey of energy industry security professionals in which large majorities of respondents said that security controls and standards are not keeping pace with the rollout of new equipment.

The Energy Sector Security Consortium (EnergySec) is a non-profit forum for the exchange of security information among asset owners, industry partners and the U.S. government.

The National Institute of Standards and Technology (NIST) has been charged in the Energy Independence and Security Act of 2007 with identifying and developing the technical standards needed to ensure utilities, manufacturers, equipment testers and regulators will be working on the same page.

The agency recently released an updated version of its Framework and Roadmap for Smart Grid Interoperability that identifies technical standards for interoperability, and also is identifying security standards for the industry.

But standards development is a slow process, and 75 percent of the 104 respondents in the survey, done in partnership with the security company nCircle, said no one has adequately addressed security in smart-grid deployment. Seventy-two percent said development of security standards are not keeping pace with deployment and another 61 percent said that security controls on current smart meters are not adequate.

Although a majority of respondents — 53 percent — said there was too much hype on security issues, 70 percent said smart meters and the metering infrastructure, including transport networks, are the most vulnerable to cyber attacks.

Developing standards for the grid took on urgency in 2009 when $4.5 billion became available through the Energy Department in the American Recovery and Reinvestment Act for the development of smart-grid technologies, to modernize existing infrastructure and fund demonstration and deployment programs.

NIST developed a three-phase plan to accelerate the identification of existing standards applicable to the smart grid; establish a Smart Grid Interoperability Panel (SGIP) of government, standards organizations and industry group for the development of the many additional standards needed; and to create a conformity testing and certification infrastructure.

Miller does not fault NIST’s performance.

“The standards-making process is intentionally slow,” he said. “NIST is probably working as fast as NIST could.” But because new networked equipment already is being installed in the energy infrastructure, “somebody is going to have to swallow the reality that innovation will outpace standardization.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me