Seasonal weakness claimed for control index drop

02/10/2006


NEMA's Primary Industrial Controls Index declined 2.3% between the third and fourth quarter of 2005. The industry blamed the drop on a typical market weakness in the fourth quarter as opposed to any slowing in the industrial control market.

Compared to the fourth quarter of 2004, sales of industrial control products and systems jumped 7.2%, marking the ninth consecutive quarter of year-over-year growth in the Primary Industrial Controls Index. The index's annual average for 2005 was 87.7, more than a 5% gain versus 2004 and its highest reading since 2000.

The Primary Industrial Control and Adjustable Speed Drive Index fell 1.4% during 2005's fourth quarter. The decline likely stems from seasonal fluctuations, as sales growth on a year-over-year basis remained robust, rising more than 12% versus the fourth quarter of 2004. The index's annual average for 2005 set a new high since its inception in 2001, climbing more than 7% versus 2004.

"Manufacturing sector growth will remain a key source of demand for industrial controls and adjustable speed drives," says Brian Lego, NEMA's director, economic analysis. "During the fourth quarter of 2005, the factory-operating rate registered its highest reading since the third quarter of 2000 and total manufacturing output excluding high-tech industries increased to a new all-time high. Rebuilding Gulf Coast areas damaged by hurricanes will bolster goods production during the first half of 2006.

“Renewed inventory rebuilding will provide a measurable boost as well, as manufacturers ramp up production so that wholesalers and other businesses can replenish stocks,” said Lego. “Finally, the business investment environment will remain a positive factor for manufacturing activity, as near-record profits have left businesses flush with cash and ready to spend on industrial machinery and equipment."

The Industrial Control Business Indices represents monthly sales information collected by NEMA from its members, the major industrial control manufacturers in the U.S. market. Detailed information is only available to NEMA members. For more information, contact Walt Kozikowski, industry director, at (703) 841-3262 or wal_kozikowski@nema.org . To view the indices, visit the NEMA website





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me