Schneider study: Execs see energy as business, moral imperative

Energy efficiency is more than a business driver; it is a moral imperative, according to the results of a recent Harris Interactive Poll commissioned by Schneider Electric.

03/14/2011


The independent survey of over 300 senior executives at Fortune 1000 companies sought to understand executive attitudes towards energy efficiency. The study revealed that while three-quarters of all executives reported the importance of saving energy increased in their organizations over the past two years, the bottom line still prevails when making decisions to implement enterprise-wide programs.

Of the Fortune 1000 senior executives surveyed, 88% feel business has a moral responsibility, beyond regulatory requirements, to make their companies more energy efficient. At the same time, 61% of respondents say that potential cost savings are their biggest motivator to save energy at the enterprise-level, outranking environmental concerns (13%) or government regulations (2%).

Potential savings were cited by 61% of executives as the key driver in making their organizations more sustainable, stating that their companies would be motivated to use less if there was an energy management solution that could save them money. Cost savings was by far the most widely cited factor among the executives, with the remaining respondents reporting the following:

  • Environmental benefits: 13% cited stewardship of the environment to be a main motivator.
  • CEO mandate: 10% said their companies would use less energy if the CEO required it.
  • Education: 7% said if they knew how to reduce consumption, they would change behavior.
  • Increased cost: 7% said that their companies would use less energy if it was a more expensive product.
  • Government regulation: Just 2% of respondents said they would only use less if it was required by lawmakers.

“The findings of the survey reinforce what we’re hearing daily from our customers,” said Christopher Curtis, President and CEO of Schneider Electric in North America. “Business leaders want to be good corporate citizens regarding their energy management, they often just don’t know where to start. At the same time, we’re in the process of emerging from the worst economic downturn since the Great Depression, requiring cost savings to be a key part of the solution. We are beginning to see energy management services become a strategic asset for companies looking to save money.”

A divide on Cap and Trade

The survey also shows near evenly split opinions from executives on the business impact of putting a price on carbon, revealing that there is little confidence that a cap and trade policy will lead to increased sustainability practices among companies. The majority are divided between two beliefs: that cap and trade policies will be ineffective or that they will be effective only if the generated revenues are used in a way that enables companies to be more energy efficient.

  • 40% said they believe cap and trade policies will not result in increased energy efficiency; rather it will likely cause industries to emit the same amount of carbon prior to the policies, and charge more for products in order to cover business costs.
  • 38% believe cap and trade policies will result in increased energy efficiency only if the revenue generated is directly applied to research and development, social programs and initiatives that enable companies/industries to use less energy.
  • 22% believe cap and trade policies will definitely result in increased energy efficiency as it will force industries to adopt energy efficiency technologies and practices to scale back on carbon emissions.

“We as business leaders or government cannot be neutral or indecisive when it comes to carbon management,” Curtis added. “The simple truth is we’re sitting on the sidelines when it comes to devising industry accepted standards and requirements for de-carbonizing our economy. Nothing meaningful is happening, which is unacceptable. The survey shows awareness is increasing, a good first step. The next step needs to be action – putting sustainable carbon and energy management programs in place and taking responsibility for them on a day-to-day basis. This will be a defining factor in our collective success or failure in leaving the world better than the way we found it.”

Harris Interactive conducted the survey within the United States in the fourth quarter of 2010, among a total of 301 Fortune 1000 Executives. Company revenue and number of employees were weighted where necessary to bring them into line with their actual proportions in the larger universe of Fortune 1000 companies.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me