Safety hike after Yellowstone burst

Exxon Mobil took twice as long as it said it did to fully seal a pipeline that spilled 1,000 barrels of crude oil into the Yellowstone River, according to federal documents.

07/11/2011


Exxon Mobil tISS Sourceook twice as long as it said it did to fully seal a pipeline that spilled 1,000 barrels of crude oil into the Yellowstone River, according to federal documents.

Details about the company’s response to the Montana pipeline rupture came to light this week. The Department of Transportation (DOT) ordered the company to bury the duct deeper beneath the riverbed, where they buried it 5 to 8 ft underground to deliver 40,000 barrels of oil a day to a refinery in Billings.

Records show Exxon did not seal the pipeline until 56 minutes after the break occurred Friday near Laurel. That’s longer than the 30 minutes company officials said in a briefing Tuesday with federal officials and Gov. Brian Schweitzer.

An Exxon Mobil spokesman said the longer time span came from information provided to the agency by the company and the discrepancy might have come about because Exxon Mobil Pipeline Co. President Gary Pruessing was speaking without any notes in front of him when he addressed Schweitzer.

“Clearly our communication with the regulator (DOT) is the one that we’ve got precision on,” spokesman Alan Jeffers said.

It was not the first time the company offered clarification of its response and assessment of the spill. A day earlier, the company acknowledged under political pressure the leak’s impact could extend far beyond a 10-mi stretch of the river it initially said was the most affected area. The company had earlier downplayed government officials’ assertions damage spread over dozens of miles.

The waterway rose above flood stage Tuesday which raised fears that surging currents could push crude into undamaged areas and back channels vital to the river’s prized fishery. Conditions have also hampered efforts to find the cause of the break.

The river has been flowing too swiftly for crews to reach some oiled areas, and forecasters said mountain snowmelt was adding to high water levels. Officials said the surge may push oil into areas that have not suffered damage yet.

Transportation officials said Tuesday oil was as far downstream as 240 mi in Terry, Mont. The agency said Exxon Mobil provided that information, but company spokesman Alan Jeffers said he was not aware of any such sighting.

Exxon planned to test the river’s conditions with a jet boat, with eight more on standby if the launch is successful, Glass said.

Federal regulators have ordered Exxon to make safety improvements to the 20-yr-old pipeline. Among them was an order to re-bury the line to protect against external damage and assess risk where it crosses a waterway, which the company intended to comply with, Jeffers said.

The company also will have to submit a restart plan to the DOT before crude can again flow through the line.

Schweitzer also ordered a review of pipelines that cross major and minor rivers in the state. Officials will look at the pipes’ age, location of shut-off valves and whether they are similar to the ruptured pipe. He said the state has 88 such crossings.

Modern pipelines can be buried as much as 25 feet beneath bodies of water; Exxon Mobil’s Silvertip line was 5 to 8 ft below the bottom of the Yellowstone.

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me