Safety Forum: Safety targets productivity

A manufacturer can have safety and productivity at the same time.

12/14/2011


ISSSource.comA manufacturer can have safety and productivity at the same time. That is not a concept of living in a fantasy world; if manufacturers are smart in using the proper technology and empower an enlightened work force, they will work and produce product in a safe environment which will mean they are producing more product devoid of unplanned shutdowns, said presenters during the Rockwell Automation Fair 2011’s Safety Automation Forum in Chicago.

“There are opportunities in safety,” said Steven Eisenbrown, senior vice president of strategic development at Rockwell. “When talking about safety and productivity five to 10 years ago people thought it was mutually exclusive. Good operating companies do all things well. Safety is integrating into mindsets and cultures and that is then ingrained into operating parameters,” he said.

What companies need to do to achieve quality safety and productivity is to develop a safety culture, perform safety assessments and invest in technologies and services, Eisenbrown said. Talking about creating a safety culture is easier said than done; there are challenges.

Three solid challenges are cultural challenges, business structural challenges and procedural challenges, Eisenbrown said.

Some issue are obvious, but when you look on the procedural area, you always have to see if safety and operations are on the same page and making sure they are on the same page on common goals.

One of the ways to reach those common goals is to work with everyone on the culture and not force it down people’s throats.

“When we coach people, they realize safety is about them,” said David Sarkus, industry veteran and author of five books talking about the safety culture. “The human element is such an important element.”

The idea of police workers compared to coaching them was the theme through Sarkus’ presentation. Coaching allows for a greater give and take and more people respond favorable, versus policing or telling people what to do and not allow them to think.

Sarkus related a story a Ford Motors worker told him years ago, when the worker said Ford paid him for his arms and his eyes, but they could have his brain for free. The problem was, they never let him use it.

“Oftentimes we beat people into submission to make them work safer. If you listen to them, so many great things can happen,” Sarkus said. “We often forget about the human aspect of safety.”

That is not to say corrections should not occur because conflicts do come up in a normal workplace.

“Correcting is necessary. If you can’t get people to use the machines the way they are supposed to, we can’t get the most out of them,” Sarkus said. “We need to make sure we let our people work safely before we correct them.”

In the end, it always comes back to communication.

“Conflict resolution is vital; issues arise and they need to be resolved,” Sarkus said. “Conflict needs to be resolved for clarity. Your supervisors need to clarify their vision for safety every day.”

Hale is the editor and founder of Industrial Safety and Security Source (ISSSource.com). You can reach him at ghale(at)isssource.com.


Edited by Amanda McLeman, Managing Editor, Plant Engineering and Control Engineering.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me