Rubicon, it’s all about the product mix

While LED adoption continues to grow at a healthy rate in backlighting, LEDs per panel fell significantly in 2H’10, offsetting much of that growth, In addition, the lighting market is still dwarfed by backlighting. As a result, utilization was not as healthy as expected in Q4’10. Thus, less sapphire was required to meet demand. So, if there was a miss, it will likely be on volume.

01/31/2011


IMS research: excellence in market intelligneceRubicon was downgraded today by Canaccord Genuity on pricing peaking in Q4’10 and price reductions in 2011. However, that is somewhat misleading in that pricing may have peaked in Q4’10, but it is flat to down only slightly in Q1’11 and it looks to be flat to down slightly in Q2’11. We expect to see larger price reductions in 2H’11. In addition, there is still significant room for sapphire suppliers to grow revenues and improve their margins on mix shifts. There are fewer suppliers and less capacity at larger wafer sizes, particularly 6”, and margins are much higher at those sizes. In addition, certain LED manufacturers focused on lighting are looking to move rapidly to 6”. As a result, if Rubicon continues to enjoy elevated penetration at 6” with its $71M 6” contract initiating in Q4’10, it could meet its gross margin target of 56-59%. Rubicon guided to <$5M at 6″ in Q4′10, growth in that number could significantly boost their chances to meet or exceed their gross margin target. In addition, Rubicon will begin to vertically integrate the labor-intensive polishing step in Q4’10 through its new Malaysia facility which may also contribute to higher gross margins.

The bigger concern from our standpoint is total volume. While LED adoption continues to grow at a healthy rate in backlighting, LEDs per panel fell significantly in 2H’10, offsetting much of that growth, In addition, the lighting market is still dwarfed by backlighting. As a result, utilization was not as healthy as expected in Q4’10. Thus, less sapphire was required to meet demand. So, if there was a miss, it will likely be on volume.

Longer term, we believe the sapphire market has the potential to remain quite healthy as 2” sapphire demand will likely remain tight due to all the new entrants in China and sapphire manufacturers reluctance to produce 2″. Larger wafer sizes should enjoy higher gross margins than 2″, although 4″ does seem to be coming under more margin pressure than other sizes.  If all the new Chinese LED manufacturers yield poorly, that just means they will consume more sapphire which is good for sapphire suppliers so long as these companies survive. The biggest concern is that capacity investments remain under control and are closely tied to LED demand rather than MOCVD capacity. Sapphire suppliers have done a good job so far, but now many polysilicon suppliers are jumping in and could create a healthy oversupply and kill what has been a lucrative space.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me