Rockwell Automation touts smart, safe, sustainable manufacturing solutions

Plant-wide optimization, machine-builder performance, and sustainable production are among highlights from Rockwell Automation at 18th annual customer and partner event, Automation Fair.

11/11/2009


Rockwell Automation opened its Automation Fair event today in Anaheim, CA, to nearly 9,000 customers, Rockwell Automation Partner Network members, industry analysts and media, the company said. Themed "Smart, Safe and Sustainable Manufacturing," the event provided attendees the opportunity to see the newest technologies and solutions available to help improve plant-wide optimization, machine-builder performance and sustainable production.

Rockwell Automation says it offers:

  • Plant-wide optimization - A changing global economy is driving manufacturers to seek new continuous improvement methodologies - enabled by the convergence of industrial automation and information technology. Through customer round-table discussions, theater presentations and technical sessions, attendees can identify ways to use automation investments to drive innovative engineering, flexible operations and efficient maintenance across their organizations.
  • Machine-builder performance - Machine builders manufacture industrial equipment that uses different levels of automation technology, depending on the end use of the machines. They require flexibility and seek Rockwell Automation solutions to help reduce total cost to design, develop and deliver machines and improve time to market.
  • Sustainable production - Sustainable production is the only long-term solution to overcoming the rising costs of energy, raw materials, environmental regulations, workers' compensation and product liability. Rockwell Automation solutions help manufacturers overcome today's economic pressures, achieve long-term business goals, improve global competitiveness and brand value, and have a more positive impact on society and the environment.
    • "Our goal this year is to help customers make the most of their investment in automation and information technology, improve their competitiveness, and make sure they are well-positioned to capitalize on the economic recovery," said Keith Nosbusch, Rockwell Automation chairman and CEO.
      "Plant-wide optimization represents a new era in manufacturing. Companies making the investment are better-positioned to address new sustainability objectives and respond to changes in consumer demand," Nosbusch said.

      • On Nov. 10, Nosbusch and executives other industry organizations spoke at the company's annual Manufacturing Perspectives global media forum. Speakers described the trends driving global manufacturing and offered insight into the global economic outlook. In addition, Nosbusch provided an overview of the new products, services and developments that highlight this year's Automation Fair event. These included:
      • An industrial energy management "greenprint" that helps manufacturers take an "inside-out" approach to energy management;
      • The launch of the FactoryTalk VantagePoint EMI software and FactoryTalk Historian Machine Edition software;
      • A portfolio of integrated motion solutions over EtherNet/IP;
      • A new series of servers and workstations for building a process automation system;
      • New Allen-Bradley products, such as an extension to the safety light-curtain line, a new safety controller for midrange applications, a new managed switch, two new Allen-Bradley ControlLogix controllers, and servo motors and drives.
        • The Automation Fair event continues today and tomorrow with workshops, technical sessions, industry forums, hands-on labs and more than 100 exhibitors, which include members of the PartnerNetwork platform.

           



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me