Rockwell Automation puts emphasis on convergence at conference

Automation Fair focus is on plant/IT cooperation

12/02/2008


Rockwell Automation has released results of a new study representing a broad cross-section of manufacturing industries revealing that companies

progressing toward converging their IT and controls engineering organizations are reaping major benefits, including higher efficiency, increased reliability, shorter project timelines and better business continuity. The study, released at Automation Fair in Memphis in November, also found that those with more integration between these functions experience less conflict and are more optimistic about the future of convergence.

The objective of the study, which analyzed responses from more than 300 control engineers and IT/IS professionals, was to gain insight into convergence trends and identify barriers, as well as best practices that companies are using to accelerate the process. The study also supports recommendations outlined in a white paper commissioned earlier this year by Rockwell Automation and authored by analyst firm Industry Directions and consultant firm Systems Innovation Management outlining the potential benefits of IT/Controls convergence.

“These findings confirm many of the performance advantages that we had long suspected come from stronger collaboration between IT and controls departments, and we’ve uncovered a few new ones as well,” said Kevin Roach, vice president of software, Rockwell Automation.

The study identified management involvement as the most influential and effective driver of convergence. In fact, the analysis showed that in more integrated companies, 90% of the respondents indicated that senior management is “promoting change” or is “somewhat involved”. Conversely, in companies where IT and control engineering is less integrated, 40% of the respondents described senior management as “uninvolved in driving change”.

The study also found that those with IT/IS responsibilities tended to be more aggressive toward seeking and initiating progress toward convergence. This correlates with the differences in how the two groups evaluate the advantages of convergence.

According to the results, 67% of IT respondents indicated that convergence had more advantages than disadvantages, compared to only 39% of controls engineers.

The survey also revealed some unexpected benefits of convergence, including improved security; improved visibility across multiple plants; improved disaster recovery; and reduced system complexity due to improved designs. Other findings gave insight on the positive impact that convergence is having on various manufacturing processes and programs. Those initiatives where convergence is showing the most impact include:

  • Information and internet protocol availability and security

  • Lean manufacturing or lean enterprise

  • Real-time manufacturing

  • Total quality programs like Six Sigma

    • “Just as manufacturers realize the strategic importance of integrated information, many are now beginning to realize the need to create an integrated environment where plant-floor and IT functions are managed in a collaborative, synchronized manner,” Roach said. “This converged framework allows teams to better collaborative to assess current manufacturing and IT systems, and begin to set standards for integration, data management and future technology investments.”

      A summary of the study’s key findings is available as a supplement to the white paper titled, “Come Together: IT-Engineering-Manufacturing Convergence Furthers Success”. This paper, released in June 2007, summarizes the conclusions from a series of in-depth interviews conducted with manufacturing and IT professionals earlier this year.

      For a copy of the original IT-Engineering Convergence Whitepaper, please visit: www.rockwellautomation.com/go/converge .



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me