Robotics, energy costs rise as Europe tackles plant issues head on

The robots can juggle. They can play goalie. They can float through the air and propel themselves through water. They can perform dozens of dazzling maneuvers in a clean room after only being told once what to do.

05/15/2008


 

The robots can juggle. They can play goalie. They can float through the air and propel themselves through water. They can perform dozens of dazzling maneuvers in a clean room after only being told once what to do.

 

I am fortunate that my wife met me before she met the robots.

 

The robots were one of the main attractions at the 2008 Hannover Messe in Germany in April. The annual gathering of Euro-centric manufacturing innovation brought attention to the use of robotics on the plant floor. Everyone knows they can be taught to pick and place and weld and lift. Who knew they were athletic and lithe as well?

 

“Don’t be jealous of the robots,” one person told me on the show floor. I’ll do my best, but it’s hard not to be a little jealous.

 

The robotics displayed at Hannover Fair were one solution to the growing skilled worker shortage in manufacturing, a problem as acute in Europe as it is in the U.S. The other approach was to not just encourage the attendance of young people on the show floor, but to engage and challenge them as well. Through a program called TecToYou, sponsored by the Federation of German Industries, high-school and college students were welcomed on the show floor to observe the thousands of displays and to bring them in contact with peers. A job fair was conducted at Hannover Messe and students walked away with armfuls of booth materials and experiences.

 

As in the U.S., German manufacturers have recognized the skilled worker shortage. As in the U.S., the barriers to solving the problem have been many. “Business was quick to recognize this problem and highlighted it repeatedly,” said Jürgen Thumann, president of the Federation of German Industries. “However, politics is a complicated business and often too slow to react to problems. What’s more, the education system in Germany is awash with red tape. Universities do not necessarily gear their range of courses to the labor market. Schools do not prepare pupils thoroughly enough for mathematics-based courses. Consequently, there is a lack of engineers while many people are unemployed because they studied the wrong subjects. Universities have to tailor their courses to demand, students and the labor market.”

 

The importance of the program was underscored by German chancellor Angela Merkel in her comments opening Hannover Messe. “This culture of innovation is important. We want to nurture it and take care of it,” Merkel said. “The initiative to train the younger generation, TecToYou can make a valuable contribution in this context.”

 

The other major issue highlighted at Hannover Messe is one where Europe is well ahead of the U.S. %%MDASSML%% energy management. The World Energy Dialogue was an effort to engage world manufacturing leaders on the issue of conserving energy and delivering sustainable manufacturing strategies to reduce carbon emissions.

 

“It is a joint challenge to the industrial as well as the emerging nations to accelerate our transition to low-emission energy providers,” said Dr. Antonio Pflüger of the International Energy Agency.

 

It was a theme at almost every booth as well. Supplier after supplier discussed how to reduce the energy needed to operate a plant effectively and to reduce greenhouse gas emissions.

 

It was also an issue at the opening ceremonies at Hannover Messe, a gala event attended by Merkel and former Japanese prime minister Shinzo Abe, now a special envoy. Japan was the 2008 Partner Nation at Hannover Messe. Stephan Weil, lord mayor of Hannover, noted that his city and Hiroshima, Japan are sister cities and both share in the experience of devastation and reconstruction after a war. “Industrial nations need to learn and must learn from each other,” Weil said. “We can learn from our sister city that education and research must take precedence.

 

“Hannover Fair stresses the need for meeting international challenges,” Weil added. “We face a major global challenge in climate change. Climate protection is a tremendous technological challenge.”

 

Which brings us back to the robots. At Festo’s booth, a jellyfish propelled by eight aluminum foils and powered by a pair of lithium-ion batteries is floating above the festival attendees. Named Airjelly, the contraption is designed along basic mechanical principles, but with one small catch. Since it is a helium balloon, its total weight in kilograms cannot be a number higher than its filling volume in cubic meters. Since Airjelly’s balloon can hold 1.3 cubic meters, the total weight is 1.3 kg %%MDASSML%% or just under 3 pounds.

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me