Robotic bird flies at Pack Expo 2012

Festo Corp.’s SmartBird, a bionic, lifelike herring gull replica capable of autonomous flight via remote control, was demonstrated at Pack Expo 2012, continuing the company’s work that emulates nature to help advance industrial automation products.

12/05/2012


SmartBird from Festo is hand launched to start a flight at Pack Expo 2012. CFE Media photo by Frank J. BartosDynamic demos have become a popular draw at technology shows, often presenting attendees with useful innovations. A case in point was the recent showing at Pack Expo of Festo Corp.’s “SmartBird”—a bionic, lifelike herring gull replica capable of autonomous flight via remote control. Development of SmartBird is a continuation of the company’s work that emulates nature, with the potential to yield new solutions translatable into industrial products. 

The study of nature to derive insights into more efficient control technologies has been ongoing at Festo for some time. Part of the company’s Bionic Learning Network, such development projects are intended to yield new approaches and solutions for automation. The SmartBird project had the objective to “decipher the flight of birds in an energy-efficient technical adaptation of the natural model,” according to Festo. It represents a two-year development with university partners.

Festo SmartBird goes through its paces in a McCormick Place conference room at Pack Expo 2012. CFE Media photo by Frank J. BartosSmartBird implements true ultra-lightweight construction: Polyurethane foam skin was applied over a carbon-fiber skeleton to yield a model weighing 0.45 kg (about 1 lb). The replica has a 2-m (6.6 ft) wingspan and 1.07-m torso length, making it substantially larger, but less than half the weight of an average male herring gull. SmartBird can take off, fly, and land autonomously with wings that beat up/down and also twist for better flight efficiency. The inner portion of the dihedral (gull) wings provides lift, while the outer torsionally flexible part supplies thrust.

Flight power comes from a brushless servo motor that produces wing flapping motion through a gear and lever mechanism. There is also head and tail motion, provided by two brushless digital servo units. Miniature servo motors at the wing tips provide torsion for wing warping. This allows directing the wing’s leading edge into a positive angle of attack during the upward flapping stroke, then changing to negative angle of attack for a brief part of the stroke cycle to enhance thrust. An onboard electronics unit, using a 32-bit microcontroller, synchronizes the various wing, torso, and tail movements. Wing flapping frequency is variable for speed control, but the flapping motion has constant amplitude.

Festo mechanical jellyfish, also shown at Pack Expo 2012, are among other bionic offerings from the company. CFE Media photo by Mark T. HoskePower requirement is 23 W for takeoff and 12 W in flight, supplied by a lithium-polymer battery. SmartBird is controlled by a small remote radio unit within the sight range of about 2 km. Maximum flight speed is 40 km/h (nearly 25 mph) and ceiling height is 500 m.

SmartBird was first shown at the Hannover Industrial Fair in 2011 and is one of four prototype birds in existence worldwide. An anecdotal note: During one of SmartBird’s numerous outdoor flight demos,  a flock of seagulls reportedly become curious about SmartBird and proceeded to swarm and squawk around this “strange relative.”

Among potential benefits expected from this project are advances in understanding flow behavior, remote condition monitoring in real time, energy efficiency, and lightweight design of products, Festo noted.

www.festo.com/us 

- Frank J. Bartos, PE, is a Control Engineering contributing content specialist. Reach him at braunbart@sbcglobal.net 

Go Online

More about the Festo Bionic Learning Network, photos, videos



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me