Robotic automation's impact on packaging, processing industries

Robotic automation capabilities have expanded in recent years and enhanced capabilities, along with the increase in overall automation levels, is allowing processing and packaging plants to introduce new products on the same assembly lines.

01/06/2018


The way our food is prepared, processed, and packaged has become a highly automated process. In recent years, robotic and automation equipment has steadily found its way into most food processing and packaging facilities, and this trend is expected to continue over the next few years.

According to BCC Research, the food processing and packaging market will be valued around $31.5 billion by 2020, growing at a 4.2% compound annual growth rate (CAGR). Separately, the food processing market and the food packaging market will be worth $14.2 billion and $17.3 billion in 2020, respectively.

This steady growth marks an important shift in the way food processing and packaging plants operate, requiring new equipment and new investments as well as highly trained employees.

According to a survey from the Association for Packaging and Processing Technologies, 94% of food packaging operations are using robotics already. As for food processing, approximately a third of companies are using robotics.

Robotic automation is already deployed in high volumes in the food processing and packaging industry, but the survey also revealed that half of companies in this industry plan to increase automation levels in the next three to five years.

Image courtesy: Bob Vavra, CFE MediaThis increase in automation will be accompanied by the hiring of new employees with more technical skills and higher spending on capital equipment.

Food automation's effect on processing, packaging industries

Robotic automation capabilities have expanded in recent years. Industrial robots have become more flexible and more efficient with better programming and better sensors. This increase in robotic capabilities, along with the increase in overall automation levels, is allowing processing and packaging plants to introduce new products on the same assembly lines.

In fact, four out of five packaging and processing plants already deal with more than 100 product types, with a majority expecting that number to increase in the next few years.

Food automation has had a big impact in the processing and packaging industry, and will continue to do so for the foreseeable future. But it's still just one example of robotic automation transforming and improving the production capabilities of an entire industry.

This article originally appeared on the Robotics Online Blog. Robotic Industries Association (RIA) is a part of the Association for Advancing Automation (A3). A3 is a CFE Media content partner. Edited by Chris Vavra, production editor, Control Engineering, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me