Robotic automation's impact on packaging, processing industries

Robotic automation capabilities have expanded in recent years and enhanced capabilities, along with the increase in overall automation levels, is allowing processing and packaging plants to introduce new products on the same assembly lines.

01/06/2018


The way our food is prepared, processed, and packaged has become a highly automated process. In recent years, robotic and automation equipment has steadily found its way into most food processing and packaging facilities, and this trend is expected to continue over the next few years.

According to BCC Research, the food processing and packaging market will be valued around $31.5 billion by 2020, growing at a 4.2% compound annual growth rate (CAGR). Separately, the food processing market and the food packaging market will be worth $14.2 billion and $17.3 billion in 2020, respectively.

This steady growth marks an important shift in the way food processing and packaging plants operate, requiring new equipment and new investments as well as highly trained employees.

According to a survey from the Association for Packaging and Processing Technologies, 94% of food packaging operations are using robotics already. As for food processing, approximately a third of companies are using robotics.

Robotic automation is already deployed in high volumes in the food processing and packaging industry, but the survey also revealed that half of companies in this industry plan to increase automation levels in the next three to five years.

Image courtesy: Bob Vavra, CFE MediaThis increase in automation will be accompanied by the hiring of new employees with more technical skills and higher spending on capital equipment.

Food automation's effect on processing, packaging industries

Robotic automation capabilities have expanded in recent years. Industrial robots have become more flexible and more efficient with better programming and better sensors. This increase in robotic capabilities, along with the increase in overall automation levels, is allowing processing and packaging plants to introduce new products on the same assembly lines.

In fact, four out of five packaging and processing plants already deal with more than 100 product types, with a majority expecting that number to increase in the next few years.

Food automation has had a big impact in the processing and packaging industry, and will continue to do so for the foreseeable future. But it's still just one example of robotic automation transforming and improving the production capabilities of an entire industry.

This article originally appeared on the Robotics Online Blog. Robotic Industries Association (RIA) is a part of the Association for Advancing Automation (A3). A3 is a CFE Media content partner. Edited by Chris Vavra, production editor, Control Engineering, CFE Media, cvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me