Riot Raises Questions Regarding CCTV Effectiveness

This week’s riots in London have shown that there is a limit to what electronic security can do: at some point you’ll need a pair of boots and a truncheon. But even then there have been complaints about ineffective deployment of the police; being in the wrong place at the wrong time.

08/11/2011


IMS research: excellence in market intelligneceThis week’s riots in London have shown that there is a limit to what electronic security can do: at some point you’ll need a pair of boots and a truncheon. But even then there have been complaints about ineffective deployment of the police; being in the wrong place at the wrong time.

The rioters themselves have maximised the use of technology with social media and instant messaging being used to circulate information and organise their “protests”. This is one of the reasons that the police are struggling. It is hard for them to keep up with the speed of the rioters.

Facial detection VCA (Video Content Analysis) applied to the CCTV footage and cross-referenced social media platforms, such as Facebook, may still be a few years off from being a reliable way of identifying those who need to be brought to justice, but it is an example of where the current technologies that we have may be going.

On a more realistic note, enhancing the effectiveness of CCTV, in one of the most CCTV-covered cities in Europe (London contains around a third of all the CCTV cameras in the UK), could see an increase in police deployment efficiency in response to trouble flaring. However, in this particular case, these existing systems do not appear to be being used to their optimum advantage, still relying heavily (and in some cases solely) on human judgement and awareness. This raises questions about whether their value is truly being realised.

Whilst “Minority Report” style tracking and detection is still very much science fiction, present day advances in video analytics and physical security situation management (such as PSIM) could provide significant benefits to existing systems. Furthermore, this is a lesson for all manufacturers and integrators: usability is a key factor for success in security systems. Technology needs to be applied intelligently and used to its maximum potential. Spending millions on security equipment does not equate to increased security if the system cannot be used effectively.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me