Reuse of lithium-ion battery packs to be tested

ABB, 4R Energy, Nissan North America and Sumitomo Corporation of American are testing and evaluating the reuse of lithium-ion battery packs that are used for the Nissan LEAF, which is currently the only all-electric car used for the mass market.

02/06/2012


ABB, 4R Energy, Nissan North America and Sumitomo Corporation of American are testing and evaluating the reuse of lithium-ion battery packs that are used for the Nissan LEAF, which is currently the only all-electric car used for the mass market.ABB, 4R Energy, Nissan North America, Inc. (NNA) and Sumitomo Corporation of America have formed a partnership to evaluate the reuse of lithium-ion battery packs that power the Nissan LEAF, the world’s only all-electric car designed for the mass market.

The purpose is to evaluate and test the residential and commercial applications of energy storage systems or back-up power sources using lithium-ion battery packs reclaimed from electric vehicles after use. Energy storage systems can store power from the grid during times of low usage and feed that electricity back into the grid during periods of peak demand, increasing grid performance and providing back-up power during outages. The team plans to develop a LEAF battery storage prototype with a capacity of at least 50 kilowatt hours (kWh), enough to supply 15 average homes with electricity for two hours.

“The agreement will allow us to evaluate the commercial viability of a grid storage solution and develop a prototype to effectively reuse Nissan LEAF batteries,” said Bruno Melles, head of ABB's Medium Voltage power products business, a part of the company’s Power Products division. 

Electric vehicle batteries have longer lives than those of personal computers or cell phones, with up to 70 percent capacity remaining after 10 years of use in an automotive application. This longevity allows them to be used beyond the lifetime of the vehicle for applications such as a smart-grid community energy management system or battery energy storage.

“It’s important to Nissan that we manage the complete lifecycle of the electric vehicle battery pack, even beyond its use in a Nissan car,” said Ken Srebnik, Senior Manager, NNA Corporate Planning. 

Innovative energy storage solutions are expected to become a key component of the smart grid, contributing to greater efficiency, reliability and performance. They will facilitate further integration of renewable energy sources, such as wind and solar, into the grid. The evaluation of Nissan batteries, through the partnership, will help determine their suitability for the power industry as a cost-effective energy storage solution.

The ABB Group

www.abb.com 

Nissan Americas

www.nissanusa.com 

4R Energy

www.4r-energy.com 

Sumitomo Corporation of America

www.sumitomocorp.co.jp 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me