Retrofit digital X-ray rapid growth signals advent of modular era

Rapid growth in the retrofit flat panel detector (FPD) market is predicted to signal the start of a new era in “modular” X-ray for general radiography.

07/09/2012


Rapid growth in the retrofit flat panel detector (FPD) market is predicted to signal the start of a new era in “modular” X-ray for general radiography, according to a new report from InMedica (www.in-medica.com), part of IMS Research, recently acquired by IHS Inc.

The recent release of new “retrofit” solutions has re-invigorated the market, with revenues for retrofit flat panel detectors forecast to grow more than 250% by 2016. While digital FPD technology is not new, the introduction of wireless flat panel detectors in 2008 demonstrated the potential for more flexible general radiography X-ray solutions. However, concerns regarding panel damage and security, paired with global economic challenges, slowed uptake.

The recent surge in demand for retrofit and wireless flat panel detector X-ray solutions demonstrates users concerns have been satisfied. Furthermore, continued penetration will usher in the start of a new era in general radiography X-ray: the “modular” approach.

The recently released second generation systems provide purchasers far greater flexibility and choice of rad-room X-ray configuration. Retrofit digital flat panel detector solutions also provide the added advantage to healthcare providers of lengthening the life-span of existing analogue X-ray equipment, while still maximizing the workflow and efficiency benefits of digital technology.

“The impact of wireless digital flat panel detectors so far is relatively low, with the majority installed in mature healthcare markets already well equipped with digital X-ray equipment” commented Stephen Holloway, senior analyst at InMedica. “However, strong competition in the flat panel market is driving price erosion of 7-10% annually, so these products will soon be more accessible to healthcare providers in emerging regions as well.”       

It is in regions such as Latin America, Africa and Southeast Asia where modular general radiography X-ray systems also make most sense. Sharing of wireless panels between rooms or systems can have significant cost benefits for healthcare providers with limited budgets. Retrofitting also limits the need to purchase brand new systems, allowing use of digital X-ray at a third of the cost of a new digital system.

“Shipments of retrofit flat panel detector systems in emerging regions are forecast to grow tenfold in the next five years,” continued Holloway. “Assuming price erosion continues at the projected rate, the cost difference between computed radiography and wireless FPD will narrow. This will make flat panel systems even more attractive for healthcare providers, sustaining long-term demand.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me