Report: Manufacturing migrates back to U.S.

Labor costs, quality issues drive manufacturers to take a fresh look at reshoring

04/20/2012


More than a third of U.S.-based manufacturing executives at companies with sales greater than $1 billion are planning to bring back production to the United States from China or are considering it, according to a new survey by The Boston Consulting Group (BCG).

Plastic manufacturing, Courtesy: Connor CorporationDecision makers at 106 companies across a broad range of industries responded to the survey, which BCG conducted in late February. Thirty-seven percent said they plan to reshore manufacturing operations or are "actively considering" it. That response rate rose to 48% among executives at companies with $10 billion or more in revenues -- a third of the sample.

The top factors cited as driving future decisions on production locations: labor costs (57%), product quality (41%), ease of doing business (29%), and proximity to customers (28%). In addition, 92% said they believe that labor costs in China "will continue to escalate," and 70% agreed that "sourcing in China is more costly than it looks on paper."

The results are consistent with earlier BCG findings on the changing economics that are starting to favor the manufacturing of certain goods in the U.S. In a report released last month, U.S. Manufacturing Nears the Tipping Point: Which Industries, Why, and How Much?, BCG predicted that improved U.S. competitiveness and rising costs in China will put the U.S. in a strong position to add 2 million to 3 million jobs in a range of industries and an estimated $100 billion in annual output by the end of the decade.

"These survey findings confirm our own analysis and what we are hearing from major companies," said Harold L. Sirkin, a BCG senior partner and coauthor of the firm's "Made in America, Again" series, which began last year. "Companies are realizing that the economics of manufacturing are swinging in favor of the U.S., for goods to be sold both at home and to major export markets. This trend is likely to accelerate starting around 2015."

Interest in shifting manufacturing to the U.S. is particularly strong among companies in several sectors identified in BCG's March report as nearing a tipping point. In these industry groups, China's cost advantage is likely to shrink within the next few years to the point where companies should rethink where they produce certain goods, mainly those for sale in North America. These tipping-point sectors are transportation goods, appliances and electrical equipment, furniture, plastic and rubber products, machinery, fabricated metal products, and computers and electronics. BCG predicts that production of 10% to 30% of U.S. imports from China in these industries, which account for approximately 70% of goods that the U.S. imports from that nation, could shift to the U.S. before the end of the decade.

In the new survey, 67% of respondents in rubber and plastic products, 42% in machinery, 41% in electronics, 40% in computers, and 35% in fabricated metal products said they expect that their companies will reshore production from China to the U.S.

"Not long ago, many companies regarded China as the low-cost default option for manufacturing," observed Michael Zinser, a BCG partner who leads the firm's manufacturing work in the Americas. "This survey shows that companies are coming to the conclusion surprisingly fast that the U.S. is becoming more competitive when the total costs of manufacturing are accounted for."

To request a summary of the survey findings or to arrange an interview with a BCG expert, please contact David Fondiller at +1 212 446 3257 or fondiller.david(at)bcg.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me