Report from Hannover

Control Engineering editorial director David Greenfield, Consulting-Specifying Engineer editor Michael Ivanovich, and Plant Engineering editor Bob Vavra will be reporting from Hannover Messe this week on the new ideas and new technologies coming out of the 2009 event.

04/20/2009


 

They talked of a manufacturing world without boundaries or trade restrictions, where innovation, skill and initiative would solve both the economic crisis and the global energy crisis.

Cynics might contend that could happen about the same time penguins fly. Well, they've solved that problem, too.

The opening of the 62nd Hannover Messe in Germany came with a firm acknowledgement of the crises that face global manufacturing. With energy a prime theme of this world-wide conference, speakers at Sunday night's gala opening and suppliers who provided the international press with a sneak preview of their booths both spoke of the need to use technology to address the global crisis in energy.

"Our industry is ideally equipped to return to the long-term growth track. The current and future challenges demand effective answers," said Dr. Manfred Wittenstein, president of the German Engineering Federation (VDMA). "You are all aware of our technological skills. We can offer effective solutions to the following issues: the conservation of natural resources; energy efficiency and CO 2 avoidance; alternative energy - in particular solar and wind power; electro-mobility and hybrid propulsion systems for vehicles and machinery."

Nowhere was this more evident than at Festo's booth on the fairgrounds. Last year, Festo's robotics created a self-propelled jellyfish. On Sunday, they showed off a lighter-than-air bionic silver penguin, free floating through the booth space. It was a spectacular demonstration of what Festo officials said was a fairly fundamental problem for its customers.

"We are using bionics to sound out new technologies and to offer our customers more efficient solutions in automation," said Festo chairman Dr. Eberhard Veit. "We must travel down new, entirely different paths in order to provide our customers added value."

Energy was also a major driver in the presentations from Phoenix Contact and Siemens during the press preview. Siemens' presentation on energy management at Hannover Messe will focus on three key areas:

• Identifying how energy flows through a system
• Evaluating the savings potential
• Realizing energy efficiencies.

A Siemens official noted that "energy efficiency is not only something to address where energy is consumed, but also about what are the appropriate measures toward productivity."

Part of the Phoenix Contact presentation was focused on using energy efficiency in consort with production management systems to create a flexible manufacturing process that could meet a customer's individual needs while bringing the plant and enterprise closer together. "The underlying automation is what makes it efficient," said one Phoenix Contact official.

The fair is also putting its euros where its mouth is on energy. The co-located World Energy Dialogue brings together energy leaders from around the world to discuss how to secure and develop future energy supplies.

The dialogue is also a venue where the German Energy Agency in cooperation with Deutsche Messe awards the Energy Efficiency Award to "commercial and industrial enterprises that have made an outstanding contribution to promoting energy efficiency and cost effectiveness by means of exemplary innovation." Potential for climate protection benefits will also be considered by a jury consisting of experts from commercial industries, trade press, and R&D and government institutions.

The award comes with a prize of 15,000 euros for first place, 10,000 euros for second, and 5,000 euros for third.

If the first impression from a distance is that Hannover Messe is just another trade show, the numbers speak a different message. In Hannover this week, there will be 6,150 exhibitors from 61 different nations mingling in 25 buildings, and over 500,000 people attending over five days. The main focuses of this year's show are industrial automation, energy technologies, power transmission and control, mobility, subcontracting, cutting-edge innovations and the next-generation workforce.

Fair officials have made a concerted effort to reach out to U.S. companies interested in expanding their distribution base to exhibit at the fair. They see the United States as a crucial player in the global manufacturing landscape.

Political leaders from Germany and Korea, the sponsor nation at this year's Hannover Messe, spoke at Sunday night's opening ceremony about the need to aggressively address the global economic crisis. Leaders from both nations urged a cooperative approach to manufacturing and economic issues.

"He who waits now will miss the opportunities of the future," said German president Horst Köhler. He emphasized free trade and a greater emphasis on technology, education and energy efficiency.

South Korean prime minister Dr. Han Seung-Soo echoed many of those remarks. "All the world faces an unprecedented economic crisis," Han said. "Some countries do try to isolate themselves at a time like this. Increasing trade barriers causes accelerated protectionism. Free trade provides a stimulus to help us master the recovery."



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me