Repeating the message not a waste of energy

Last September, the U.S. Environmental Protection Agency awarded its first Energy Star awards to manufacturing plants. The awards went to automakers Ford, Toyota and Nissan; cement industry leaders Ash Grove Cement Company, California Portland Cement Company and Lafarge North America; and wet corn millers Penford Products Company plant and Tate and Lyle Ingredients Americas.

03/01/2007


Last September, the U.S. Environmental Protection Agency awarded its first Energy Star awards to manufacturing plants. The awards went to automakers Ford, Toyota and Nissan; cement industry leaders Ash Grove Cement Company, California Portland Cement Company and Lafarge North America; and wet corn millers Penford Products Company plant and Tate and Lyle Ingredients Americas.

There were 17 plants honored with the first Energy Star awards. It was a great first step, to be sure. Only about 300,000 plants to go.

EPA statistics show that the U.S. manufacturing sector consumes about one-third of the energy used in the United States and contributes about 28% of U.S. greenhouse gas emissions. “Energy is a significant, controllable expense for most manufacturers, and energy efficiency is a direct way to reduce this cost while avoiding emissions of greenhouse gases,” the EPA states.

We can debate global warming as a political issue, but as an economic one, there's very little debate. Regardless of your view on the world's eco-health, reducing energy consumption makes a world of economic sense.

Cutting energy consumption in manufacturing used to be the mantra of activists and environmentalists; now it's the charge given to CFOs and plant managers. Whether you think global warming is melting the polar ice cap, it's certainly melting manufacturing profits.

There are simple ways to measure and manufacture energy savings. They don't all involve ripping out every last piece of equipment and replacing it with something new and more energy efficient. Most of what's needed is a strategy that is embraced at every corner of the plant and in every office in the company. It requires top-down plant leadership, but it is also about giving workers the responsibility for generating energy-saving ideas %%MDASSML%% and rewarding them for it.

Crisis management doesn't work. Neither does ignoring the problem. In either case, it's not really managing the problem; it's managing the outcome. Or as Walt Tunnessen from the U.S. Department of Energy notes in this month's cover story, “Too many companies do not manage energy like they manage other aspects of their business.”

Well, we know of at least 17 that do.

For the rest, this isn't complicated. Look at your energy costs. Look at your equipment. Ask your operators. Ask your utilities. Ask the Department of Energy. Get answers, and implement them.

This also isn't a new message. It's worth the energy to restate it again, which we will do at the Plant Engineering Manufacturing Summit in Chicago on April 2-3.

It will be worth the energy to act on the message.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me