Reap the benefits of CMMS with your ERP system

CMMS is essential when running enterprise resource planning (ERP) for a company's operations because it controls quality and operating costs

07/23/2013



Most corporate departments think of maintenance when they need the thermostat adjusted in the conference room. But maintenance management and CMMS are an integral part of enterprise resource planning (ERP), which runs 80% of Fortune 1000 companies. CMMS is an essential tool for managing operations and maintaining assets across the enterprise. CMMS drives quality production, ensures regulatory compliance and controls operating costs.

So how do you run a smooth maintenance operation, keep assets humming and integrate with the company’s ERP system? Before you start coding a new ERP interface, weigh the issues. Is the CMMS integration a desire for the maintenance department or a directive from the COO? How can CMMS and ERP integration reduce operating costs and contribute to business performance?

Once you answer the big picture questions and decide to move forward, consider these guidelines from someone who’s been there and done that:

1. First, make sure you think through your points of integration. Synchronize part quantities vs. share a completed purchase order (PO) – this is an important debate. Some ERP systems make it difficult to share a whole purchase order, so perhaps synchronizing spare parts in your CMMS with the ERP POs is a better approach. 

2. Do you have internal expertise, or at least affordable consulting on the ERP side?
These costs can add up. It is likely your ERP system will need configuration support to make this interface work. 

3. Don’t rush into the integration. Get to know your CMMS first, for a few weeks or even several months before finalizing your integration plans. Product experience will influence interface approach/design, and is a safer, less expensive endeavor than building the interface in advance. 

4. Assess your CMMS needs. Understand that although a CMMS vendor may have interface capabilities off-the-shelf, the interface will always need to be configured for the organization’s environment – either on the CMMS or ERP side, or both. Configuration depends on the IT environment, ERP system and version, desired integration points, in-house ERP expertise, etc. Automated interfaces should be considered semi-configured (in some cases total custom) projects.

In theory, a quality CMMS vendor should have the technological capabilities to allow any information to be passed to and from an ERP system. Most common interfaces I have developed are related to spare parts. Others include sharing “finished” purchase orders/requisitions, asset information (status, location, costs, etc.), and employee data, typically labor rates or department information.

Most importantly, have the discussion with your maintenance team. Define the business goals. Identify the integration points. Your CMMS vendor won’t be able to discuss development costs unless you have thought through the project. Do your homework upfront so CMMS and ERP can make the connection a lasting one.

Paul Lachance is president and chief technology officer for Smartware Group, producer of Bigfoot CMMS. Contact Paul at paul.lachance@bigfootcmms.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me