Reaching toward six sigma performance: Screen-saver tool keeps employees informed and connected

While looking for ways to enhance internal and external work performance, members of the communications team at GE Plastics Crystalline plant identified a need to get important information in front of employees more effectively.

01/01/1999


While looking for ways to enhance internal and external work performance, members of the communications team at GE Plastics Crystalline plant identified a need to get important information in front of employees more effectively. Traditional e-mail announcements, bulletin board postings, employee meetings, and one-on-one discussions all served a purpose, but the team was looking for a more immediate and consistent way to communicate.

The need for improvement was especially important for our business to more effectively communicate information about quality performance, such as production yield graphs and customer issues. The topic of effective communications is highly critical because the company is committed to achieving six sigma quality in its products, services, and transactions. That goal means we are committed to doing everything right at least 99.999966 percent of the time; that figure means no more than 3.4 mistakes out of every million chances. Most U.S. companies operate around three sigma today.

The communications team applied the six sigma process to find a solution to the communications issue. They started with the following known working conditions: Every person in the business uses a computer at work. The computers are connected by a local area network (LAN) with access to a server computer system (see figure). Each computer can run a screen-saver program.

After the problem and possible solutions were carefully analyzed, we purchased an off-the-shelf commercial screen-saver program capable of displaying pictures and graphs in a slide show format. A site license made the cost of the program less than a dollar per computer. The picture files for the screen saver are maintained and stored on the server. The format for the file could be anything deemed appropriate for business communications, from photographs to cartoons to graphs with production measurements.

Files are owned and updated by designated employees who can update the material from their PCs. As soon as a file is updated, it is available and displayed to its intended audience. Two types of files are used:

- Common files are displayed on every computer connected to the program

- Unique files are displayed only on specifically targeted computers.

The most effective number of files (including both types) falls between 10 and 20. The communications team found it worthwhile to limit the number of people who could update the screen saver files to the following positions:

- Safety leader: maintains common safety files,such as accident investigation reports, OSHA recordable incidents, meetings, and safety topics.

- Communications team member: maintains communication files, such as company team results, civic award presentations, upcoming plant tours, employee service anniversaries, etc.

- Human resource representative: maintains common personnel-related files, such as job postings, new employee introductions, holiday schedules, benefits news, and personnel policy changes.

- Data management coordinator: creates and maintains production measurement graphs.

Any employee is welcome to suggest or recommend information for the system. The process is informal. The person simply approaches the individual maintaining the file. For example, an employee who wants to present information of a general nature would contact the communications team member and ask to have the material posted.

Each computer in the manufacturing environment has a unique set of graphs to track measurements specific to that area. For example, shipment rates are displayed in the shipping/ receiving area; production yields are displayed in the control room; equipment maintenance records are shown in maintenance; and the production status report is shown on the plant manager's computer.

The screen-saver communication tool has proved to be a huge success within our organization. Results were measured through quarterly employee surveys. Before the system was initiated, only 10% of the workers in the building felt they received adequate information about the business. After the system was in place, that figure rose to more than 30%. The program has unquestionably had a distinct, positive impact on our production yields as well as on the morale of the manufacturing team. Furthermore, it was accomplished with existing hardware and commercially available software, a major benefit as we strive to make fiscally sound investments.

Scott Haraburda has been a production engineer for Crystalline Finishing at GE since 1996. He has a B.S. degree in chemistry from Central Michigan University and an M.S. in chemical engineering from Michigan State University. He served on active duty with the rank of Major in the U.S. Army for 9 yr and also worked at Bayer Corp. prior to joining GE. He is the author of numerous articles and a chemical engineering handbook.





Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me