Re-engineering the White Sox

Welcome back for National Manufacturing Week here in the home of the defending World Series champion Chicago White Sox. When the White Sox won the World Series in October (a sentence that still brings a smile to my face) the city of Chicago threw a parade that drew an estimated 1.75 million people. For the occasion, the city rented eight confetti cannons to shoot thousands of tons of shredded n...

03/01/2006


Welcome back for National Manufacturing Week here in the home of the defending World Series champion Chicago White Sox. When the White Sox won the World Series in October (a sentence that still brings a smile to my face) the city of Chicago threw a parade that drew an estimated 1.75 million people. For the occasion, the city rented eight confetti cannons to shoot thousands of tons of shredded newsprint on to LaSalle Street for the modern version of a ticker tape parade.

This, of course, is an inventory management issue. Who has the phone number of their local confetti cannon supplier? And, if you're like the White Sox, who hadn't won a World Series in 88 years, do you buy or rent?

What the White Sox did this past season does, in fact, have something to say about such manufacturing issues. If you look at what was accomplished in just one season, you find that it's not just a cheap excuse for me to write, again, that the White Sox won the World Series. There are some real lessons out there for everyone.

Look at the comparative regular season numbers for the White Sox between 2004 and 2005:

Year HR SB ERA Wins
2004 242784.9183
2005 2001373.6399


The White Sox had 21% fewer home runs (the kind of thing that gets you on ESPN each night) but 76% more stolen bases and an ERA more than one run lower every game. Wins were up almost 20%. They did this with only a modest increase in price and in costs.

Wins, for our analogy, equates to productivity increases. Wouldn't your plant floor celebrate a 20% increase in productivity? How would that enrich your bottom line?

So what are the lessons from the 2005 World Series Champion Chicago White Sox?

  1. Power helps — but how fast are you? Can you get to market faster and more efficiently? Some of the biggest companies don't move fast enough to change, and some very fast companies need more power. It's that combination that wins.

  2. Build with pitching . It is precisely in tougher times when a strong marketing message helps you differentiate yourself in a market. A good pitching staff —your marketing and sales team —can carry you. So can a compelling message.

  3. If it doesn't work, fix it ! In retooling their team by trading away some power for speed and by improving their depth (think second-shift productivity) the White Sox went from also-ran to wire-to-wire champion.

  4. Don't rest on your laurels . In the off-season, after the franchise's most successful season in almost a century, the White Sox replaced 32% of its roster. They re-examined what made them successful and found room for improvement.

    1. Are you ready to examine your organization, figure out what it takes to succeed, and make the needed changes to win? A few wins in manufacturing could keep those confetti cannons pretty busy.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me