PV system integrator rankings for 2011, Chinese companies make biggest gains

Germany’s BELECTRIC maintained its position as the world’s largest PV system integrator in 2011, with close to 400 MW of new PV capacity developed, according to a recently released report from IMS Research.

05/11/2012


Germany’s BELECTRIC maintained its position as the world’s largest PV system integrator in 2011, with close to 400 MW of new PV capacity developed, according to a recently released report from IMS Research, recently acquired by IHS Inc. However, the report also revealed that Chinese integrators, buoyed by the huge boom in domestic power plants, made the biggest gains, and made up three of the top 10 PV integrators in 2011.

IMS Research’s recently released quarterly report, PV System Integrators, which tracks the activities and pipelines of more than 550 global system integrators and EPCs (engineering/procurement/construction contractors) found that BELECTRIC held on to its number one position for the second year running. It was followed closely behind by China Power Investment Corporation (CPI) which was responsible for 380 MW of new PV capacity in China in 2011. Ash Sharma, senior research director for PV at IMS Research commented, “Most European system integrators had another solid year in terms of project development, highlighted by BELECTRIC’s top ranking again. But it was really the US and Chinese companies that shone in 2011 and far outpaced the rest of the pack – not surprising given their domestic markets’ huge utility-scale deployment in 2011”.

World PV System Integrator Market Rankings 2010 and 2011, Courtesy: IMS ResearchThe new report revealed that, though the biggest gains were made by Chinese integrators, good performance (in terms of project completion) was also achieved by U.S.-based companies First Solar, SunEdison and SunPower which were ranked 3rd, 4th and 5th respectively in 2011. The research also found that, though Chinese suppliers made the biggest gains in 2011 and had three of its integrators ranked in the top 10, Germany companies dominated the rest of the rankings. “Of the top 30 PV system integrators globally, 24 of these were European, showing that although Europe’ share of installations is dropping sharply, its system integrators are still able to maintain their stranglehold on the market – for now at least,” commented Sharma“Just four German integrators appeared in our top 10 ranking for 2011; however, they made up 14 of the top 30 and managed to grow their business by more than 50% to 2.2 GW.”.

Although supply of components to the PV industry has become more concentrated in recent years, the development and installation of PV systems remains incredibly fragmented, with the top 30 companies accounting for under a quarter of global non-residential PV installations. “The growing number of multi-MW, ground-mount PV projects last year did however go some way in reversing this trend; as many companies were able to climb high up the rankings on the back of just one or two projects. We expect this to continue in 2012, particularly as markets such as China, India and USA become more dominant and their preference for very large installations drives further concentration,” concluded Sharma.

Detailed analysis of more than 550 PV system integrators market share, profiles and pipelines are included in IMS Research’s quarterly PV System Integrator report.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me