PV module prices dive again in July as German rush ends

Photovoltaic module prices continued their downward trend in July, falling by more than 2% over June’s average prices and 44% down annually, according to IMS Research.

08/16/2012


IHS has acquired IMS ResearchPhotovoltaic (PV) module prices continued their downward trend in July, falling by more than 2% over June’s average prices and 44% down annually, according to the latest monthly module price report from IMS Research (recently acquired by IHS Inc.). PV module prices had enjoyed a short period of stability in June due to high demand in Germany and Italy, but have begun to decline once again in the second half of 2012.

According to the report, average prices of crystalline PV modules purchased from distributors increased by almost 3% in June, driven by high demand in Germany, the world’s largest PV market. Demand peaked in Germany in June, as developers rushed to connect systems by June 30, 2012, before the ‘grace-period’ under the previous and more attractive feed-in tariff (FiT) rates expired. Distributors were able to capitalize on strong demand, giving rise to higher pricing in the run up to the deadline.

The resulting slowdown in demand following Germany’s ‘grace-period’ deadline, and the bleak outlook for demand in the second half of the year in Europe, meant that module prices slipped again in July by 2.4%, as shown in the results of IMS Research’s monthly survey. Chinese Tier-1 module prices declined by almost 3%, whilst the largest decline came from Western suppliers, whose prices declined by over 5%.

“PV module prices enjoyed a rare period of stability in June, but are once again under pressure as demand in a number of core markets has weakened in the second half of the year,” commented Sam Wilkinson, senior analyst of IMS Research’s PV Group. “Although the industry has seen a number of significant exits from the market in the recent months, supply of PV modules still far exceeds demand, and suppliers are continuing to engage in fierce price competition.”

Despite module prices consistently declining throughout the last year, IMS Research found the outlook for prices for August to be more positive and, on average, industry buyers and sellers expected prices to increase by 0.3% in August. However, expectations varied clearly by company type with module suppliers and integrators forecasting a further small decrease, whilst distributors expect a small increase. “PV module suppliers’ margins are already dangerously low and in some cases negative, and their ability to lower prices any further is severely limited until they can make significant improvements to their cost structures,” concluded Wilkinson.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me