PV inverter market down in 2011 but growth still possible, for some at least…

The market is down, but should improve depending on stabilizing module prices. The overall market future looks bright for the next five years, however.

07/08/2011


As positive as I am about the outlook for the PV market, it certainly looks like 2011 will be a difficult year for inverter suppliers. Market revenues are set to fall by more than 10% this year, not because of low installation growth, but actually as a direct result of 2010’s bumper year. Simply put: too many inverters were sold last year than were needed and this is what will cause the market to fall this year. Firstly because the inventory needs to be burned down before fresh demand can emerge, and secondly because the high inventory and easy availability has put great pressure on prices to fall.

Our latest forecast showing PV inverter shipments at 22 GW and revenues of almost $6 billion in 2011 is of course totally dependent on our installation forecast. Currently we’re predicting a much better H2 for 2011, but this is dependent on module prices stabilizing – most customers aren’t going to be pushing ahead with projects when module prices are falling off a cliff. We’re optimistic this will lead to a strong Q3 and an even better Q4 – it could even be that demand spikes so suddenly that suppliers are caught out and a supply bottleneck happens again. Unlikely, but still very possible. 

Profile photo of Ash Sharma, senior research director for photovolatics at IMS Research. Courtesy: IMS ResearchIt’s certainly not all doom and gloom for inverter suppliers. A flat or slightly down market this year needs to be put in context – the market more than doubled last year. When revenues grew by close to 140% in 2010, it’s tough to follow this with further growth this year and many will be grateful for a “period of calm” and a chance to reassess rather than just build and ship as much product as is physically possible. Furthermore, not all segments of the market will fall and significant growth opportunities still exist. For example, whilst revenues in EMEA will be down in 2011 (largely because of the pulled forward demand in 2010), inverter revenues in Americas will nearly double and will grow more than 30% in Asia. Similarly, the inventory issue is mainly hitting suppliers of smaller string inverters, in contrast demand for larger 3-phase products will remain robust in 2011, with revenues growing by around 20%.

And wanting to finish off this blog entry on another high note, although the PV inverter market will dip this year, our latest report on the market shows that revenues will grow to nearly $10 billion by 2015 giving suppliers plenty to look forward to over the next 5 years!



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me