Providing a saner approach to maintenance

Conflict with operations can be solved with better data, communications, and integration.

02/13/2013


If production and maintenance are at loggerheads in your manufacturing plant, the way out of that jam could be better communication tools. Some of those tools are in the form of new technology that better aligns the unique goals of each part of the process; others are human tools that require talking through the issues involved.

Both were on display at the ARC Advisory Groups’ session in Orlando, “Synchronizing Operations and Maintenance,” which featured presentations from energy and transportation companies on how their operations evolved to overcome communication bottlenecks.

Such issues are often a result of a lack of data sharing across platforms, said Ralph Rio of ARC Advisory Group, who moderated the session. ARC’s Asset Lifecycle Management model puts a high emphasis on improving assets during their lifecycle.

“We feel there is opportunity for further optimization if there is synchronization across groups so when maintenance schedules downtime, it appears in the production schedule,” Rio said.

Integrating maintenance at 5 plants

“We live in a world that’s very regimented, with lots of rules we have to follow,” noted Robert Scampton of Constellation Energy Nuclear Group. His department was responsible to bring five nuclear plants in three states—each with different maintenance systems—under a common maintenance and production platform.

“We had trouble getting everyone in line,” Scampton said. “They didn’t talk very well with each other. They needed to be aligned as a fleet.”

The first part of that alignment was to determine what each facility needed to have—issues such as alarm events, tracking of equipment performance, when it was safe to perform maintenance work, and equipment licensing requirements.  After settling on a single software vendor, Constellation went about the process of pulling the team and the data together under the new platform.

“It was Change Management 101,” Scampton said. “The keys are to create a cross-disciplined team include representatives from all departments affected by the change. You have to demonstrate the importance of the changes, communicate about the change frequently and celebrate the change frequently.”

Consistent data, tagout

Besides simplifying the company’s need for rigorous regulatory compliance, the move to the common platform allowed for a single tagout procedure built into the software. The tag sharing program put in place saved staff time and focused effort without compromising personnel safety or plant safety.

Eric Winterberg with APM Terminals North America, a global port container operations company with terminals throughout the world, had a more fundamental problem. “We’re very operationally based so operations come first, maintenance second,” said Winterberg.

“There was a lack of consistency in data, but not one installation was the same. We had the challenge of standardizing that installation. Overall, the maintenance process was disconnected from operations. We were trying to catch up the whole time to keep facilities operating,” Winterberg added.

Beginning three years ago with a CMMS system in Belgium, APM Terminals will have rolled out its software to 95% of its worldwide terminals. “We’ve been able to standardized maintenance operations anywhere in the world,” Winterberg said.

Change to preventive

“It allowed maintenance results to be analyzed against operations data. We were able to find a window of time for preventive maintenance.  Maintenance moved from reactive to preventive, and it improved resource scheduling.

Winterberg said the biggest change is not in software or in personnel; it a confidence that both are producing better decisions. “It’s a mindset change for an organization,” he said. “It doesn’t happen overnight. It took us a year and half just to design the solution. Our change in mindset is evolving. But it’s a saner platform for us to move forward.”

ARC World Forum is Feb. 11-14, in Orlando, Fla. www.arcweb.com 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me