Proper air balance in food-processing facilities: 4 benefits

Cut energy costs and control temperature and condensation with an optimal plan

01/06/2014


The four benefits of proper air balance in food-processing facilities. Courtesy: CFE Media with information provided by Luke FacemyerControlling airflow and quality within a food-processing facility is critical to food safety and energy efficiency. The air flowing into areas where food is being processed must be tightly controlled. Achieving the optimal air balance within the different areas of the facility is important for maintaining room temperatures, eliminating the potential for contamination and for worker productivity. 

The key benefits of achieving and maintaining proper air balance include:

1. Lower energy costs: Improper air balance can place unnecessary pressure on exhaust fans and HVAC systems, which requires the equipment to work harder and longer, impacting energy costs. A properly installed makeup air system provides conditioned replacement air that can be heated, cooled, humidified, or dehumidified more efficiently to help reduce energy costs.

2. Condensation control: Food safety is a priority in the food-processing industry. Unwanted moisture and condensation can wreak havoc in areas where sanitation is tightly controlled. Condensation can allow moisture to gather in equipment crevices and on ledges, leading to bacteria and microbial growth. Appropriate air balance can eliminate the potential for moisture and condensation.

3. Temperature control: Room temperatures within food processing facilities must be tightly controlled to maintain sanitation standards and ensure product safety. Air balance between adjacent rooms must be monitored to eliminate the potential for air to flow between areas where temperatures are highly regulated.

4. Eliminate airborne contaminants: Controlling air flow and balance will eliminate the potential for airborne dust particles and contaminants to reach processing areas where products being produced. Food plants such as meat-processing facilities have the potential for dangerous airborne contaminants. In these facilities, the direction and frequency that air flows is especially important. The air from kill floors and rendering areas, where raw poultry and meat are handled, must never flow to areas such as packaging, where the airborne bacteria could infect the final product. 

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me