ProMat, robotics shows to combine forces in 2011

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011. Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

02/01/2010


 

 

 

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011.

 

Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

 

“The decision to collocate ProMat 2011 and the International Robots, Vision & Motion Control Show was made for several reasons,” according to John Nofsinger, Chief Executive Officer for MHIA. “Co-locating the two events will allow manufacturing, distribution and supply chain professionals unparalleled education and networking opportunities as well as exposure to the largest equipment and technology display of any show of its kind in North America.

 

“In today’s world of needing to be nimble and innovative, the collocation is a home run for participants and attendees of both events.”

 

“Robotics, vision and motion control are important components as companies strive to reach their productivity goals,” said Jeffrey A. Burnstein, President of ATC. “We feel this collocation provides an incredible opportunity for the exhibitors and visitors of each show to meet new prospects and suppliers, see new products and obtain new knowledge.”

 

Show officials said the collocated ProMat 2011 and International Robots, Vision & Motion Control Show will be the largest international event and conference of its kind ever held in the U.S.

 

More than 825 exhibitors are expected to showcase their solutions to tens of thousands of manufacturing, warehousing and distribution professionals from more than 100 countries around the globe.

 

“Over the past several years, ProMat has experienced a steady increase in both quantity and quality attendees and exhibitors delivering more material handling and logistics solutions for the supply chain. The collocation of the International Robots, Vision & Motion Control Show is a natural value-adding fit for both events,” said Nofsinger.

 

 

 



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
February 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
Jan/Feb 2018
Welding ergonomics, 2017 Salary Survey, and surge protection
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards
December 2017
PID controllers, Solar-powered SCADA, Using 80 GHz radar sensors

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me