Process optimization can reduce costs

Get a better sense of the big picture and make adjustments to your operation.


One of the best ways to reduce a facility's costs is through process optimization, which allows a company to get a better sense of the big picture and make adjustments. Courtesy: Samuel Zeller, UnsplashWith a new year comes a fresh start, and for some business owners that may mean a budget reboot. Perhaps the 2017 resolution is to cut costs at the facility—but where? There are a lot of areas to consider and one of the best ways to eliminate unnecessary costs is to optimize your processes.

Manual vs. automated

What aspects of the facility involve manual intervention? What processes are completely automated? Keep in mind, automating doesn't always equal improving. Just because a process can be automated doesn't mean it should. In some cases, manual processes can be bettered without automation. For instance, an additional work shift may solve an efficiency problem more effectively than new equipment, and in some cases, it may even be more cost-effective.

Of course, determining what processes should be automated varies from plant to plant and depends on the plant's return on investment (ROI) goals. Analyzing the extent of automation in your facility is a great place to start when looking for opportunities to improve efficiency.

Free up traffic patterns

No one likes sitting in rush hour traffic on the way to work. Meanwhile, congestion may be tying up your facility and your output-and that's even worse.

Determine where these backups are occurring and whether they're in the form of people, equipment or product. Some traffic inefficiencies can be attributed to habit, such as "shortcuts" to different parts of your facility. Others may have evolved over time, such as forklift paths that no longer make sense for your current configuration.

Find the sweet spot between ROI and shelf life

Can you facilitate a longer shelf life for your products by optimizing packaging? Obviously, the longer a product can sit on a shelf, the larger the ROI, but this can be a delicate balance. This direct relationship relies, to some extent, on packaging. Different packaging materials have various effects on the food they contain.

For example, a bag with holes will have faster degradation with exposure to the atmosphere. One way to keep bagged food fresh is with scaff flushing, or filling a bag with gas.

Think outside of the box. Or the bag.

Analyze changeover capabilities

It seems that now more than ever, consumer preferences change frequently. They crave more variety, and for your processing, that translates to quick changeovers.

Of course, flexibility costs money, so the key is being flexible enough without spending too much capital. Determine what processes are mandatory to your plant's operations and to keeping it profitable, then weigh your flexibility capacity against your operations. Assessing these factors and other data can help optimize process schedules to allow for greater flexibility in changeovers.

Look at the big picture 

As a plant owner, it's easy to get caught up in the details. When trying to optimize processes in the past, the owner may have been focusing on one little piec, such as a changeover. Plant owners can identify the best areas of opportunity and optimization if they start by looking at the entire process portfolio.

A facility assessment allows companies to take a step back and evaluate the processes that make up your plant's hectic day-to-day-as a whole-and then dive into the details. By looking at the big picture and then narrowing in, a third-party assessment team can catch all opportunities for improved efficiency.

-Todd Allsup is the vice president of food and beverage facilities at Stellar. This article originally appeared on Stellar Food for ThoughtStellar is a CFE Media content partner.

Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me