Pressures from tariffs, inventories drive down PMI

Index falls 2.1 points to 57.7% in October as production orders slow down.

11/01/2018


Courtesy: Bob Vavra, CFE MediaThe impact of global tariffs and concerns over inventories and an 18-month low in new orders has taken a bite out of manufacturing's rally in 2018, as the monthly purchasing manufacturers' index (PMI) fell 2.1 percentage points in October to 57.7%. That's the lowest level for the index since April and 3.5 percentage points off the 61.8% high in August.

Tariffs weren't the only issue impacting the index, according to Timothy R. Fiore, chairman of Institute for Supply Management's Manufacturing Business Survey Committee. The new orders index registered 57.4%, a decrease of 4.4 percentage points from the September reading of 61.8%. The production index registered 59.9%, a 4.0 percentage point decrease compared to the September reading of 63.9%. The employment index registered 56.8%, a decrease of 2 percentage points from the September reading of 58.8%.

Fiore noted the overall strength of the manufacturing market—even at 57.7%, the index is more than 15% above the floor for growth in the sector and has grown for 26 straight months. But headwinds over the past few months did slow that growth in October.

"Lead-time extensions continue, while steel and aluminum prices are stabilizing," Fiore said. "Supplier labor issues and transportation difficulties continue to disrupt production, but at more manageable levels. The expansion of new export orders softened, but five of six major industries contributed, up from two in September," Fiore added. "Overall, the manufacturing community continues to expand, but at the lowest level since April 2018."

Comments from committee members reflected the slowdown, and the impact of tariffs was cited as one of the concerns. Among the comments:

  • "All electronic components are having shortages and much longer lead times that impact our production." (Computer & electronic products)
  • "Tariffs are causing inflation: increased costs of imports, increased cost of freight and increased domestic costs from suppliers who import." (Chemical products)
  • "Protein prices continue under pressure from heavy U.S. supplies and export concerns related to trade tariffs. Higher costs related to trade tariffs are starting to be passed on to the cost of goods sold." (Food, beverage & tobacco products)
  • "While order intake remains steady, the pace has slowed since the first half the year. Instead of growing, the backlog is declining. We were processing orders at a high level; now they are at the point of status quo from late 2017. We are not concerned yet, but there is certainly trepidation about the future." (Machinery)
  • "NAFTA 2.0/USMCA does nothing to help our company, as it does not address Section 232 tariffs." (Plastics & rubber products)
  • "We continue to run at full capacity. I continue to see pricing pressures and longer lead times in most commodities." (Primary metals)
  • "Mounting pressure due to pending tariffs. Bracing for delays in material from China—a rush of orders trying to race tariff implementation is flooding shipping and customs." (Miscellaneous manufacturing)
  • "Demand is high, and the supply chains are stressed." (Transportation equipment)
  • "Orders and shipments are strong right now. Backlog for Q4 and next year are way down. Savvy customers are asking us to hold pricing on blanket orders, but material suppliers will only hold prices for a few days, which puts us in a bad spot. We'll be spending as much as possible on capital improvements before the end of the year." (Fabricated metal products)
  • "Steel tariffs continue to negatively affect our cost, even though we utilize U.S. sources for steel. Oil prices put meaningful upward pressure on cost. Continued tightness with truck drivers is expected." (Petroleum & coal products)

Bob Vavra, content manager, CFE Media, bvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
November 2018
2018 Product of the Year finalists, mild steel welding: finding the right filler, and new technique joins aluminum to steel.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Summer 2018
Microgrids and universities, Steam traps and energy efficiency, Finding help with energy projects
October 2018
Complex upgrades for system integrators; Process control safety and compliance
November 2018
Analytics quantify processes, Fieldbus networking and IIoT, Choosing the right accelerometer

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me