Preparing for all types of attacks

There are intended and unintended hits, or attacks, on control systems and if you believe what one study says, 20% are intentional and 80% unintentional.

07/13/2011


ISS SourceThere are intended and unintended hits, or attacks, on control systems and if you believe what one study says, 20% are intentional and 80% unintentional.

“We always hear about the threat of attacks, but there are unintended treats can be just as bad,” said John Cusimano, director of security at exida during his Tuesday talk entitled “The seven things every automation professional should know about control system security” at the 2011 Siemens Automation Summit in Orlando, Fla. “We have to protect from both.”

One of the intended attacks was Stuxnet.

“Stuxnet was an intended attack,” Cusimano said. “There are people that think there will be more of these types of attacks in the future.”

That worm had an impact throughout the world, Cusimano said. “It provided proof of concept. We had been talking about this for decades. Until Stuxnet, however, we didn’t have anything to show. It has really raised awareness at the executive level. At the engineering level, we have known about it. We are starting to see this level of interest at the board level.”

While Stuxnet did raise awareness, Cusimano stayed true to his talk and talked about the seven things end users should be aware of to secure themselves:

  1. Assess existing systems. “You need an understanding of where you are and where you need to be,” he said.
  2. Document Policies and Procedures. “IT and engineering are different, but they have overlap,” he said. “You need to have a set of procedures, but there may need to have an appendix for automation.”
  3. Train Personnel and Contractors. “Make personnel are aware and trained. You need to provide role-based training,” Cusimano said.
  4. Segment the Network. “You need layers of protection or defense in depth,” he said. “We need to have just one layer of protection, but multiple layers of protection. If something gets by one layer then another can pick it up.”
  5. Control Access to the System. “You really need to control who or what has access to the system,” Cusimano said.
  6. Harden the System. You can remove or disable unused communication ports or remove unnecessary applications and services. In addition, Cusimano said, the user should apply patches when and where applicable and consider whitelisting.
  7. Monitor and Maintain. “Once we have a system in place, we can’t rest on our laurels,” he said. “Things change on a daily basis.”

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me