Precision gearbox market growth depends on Eurozone, China growth rates

Sharp increase in sales in 2012 could reverse if global economy falters

12/26/2012


Shipments of precision geared products (gearboxes and geared motors with backlash ratings of less than 20 arcminutes) were nearly 80% higher in 2012 compared to 2009 levels. However, uncertainty about the Eurozone economy and China’s decelerating economic growth are the leading factors in the more than one percent decline expected in precision geared product shipments in 2013. IMS Research projects the market for precision geared products to reach an estimated value of nearly $1.7 billion with over 1.8 million units shipped in 2013.

Precision gearbox shipments, which accounted for more than 95% of the precision geared products market in 2012, increased by more than 70% from 2009 levels due to pent-up demand for servo-driven machinery and increased access to capital. A significant amount of investments were made in the automotive industry, where demand for industrial robots used in the production of vehicles spurred a sharp increase in precision planetary gearbox shipments.

Precision planetary gearboxes accounted for more than 82 percent of precision geared products shipped in 2011. Investment in new automobile manufacturing facilities is expected to continue, however at lower rates than those seen in 2010 and 2011. Sales of electric industrial robots to the automobile industry have slowed considerably in 2012 due to lower of demand for Japanese products from China and continuing weakness in the Eurozone economy.

“Chinese industrial robot manufacturers are still warming up to the idea of using high-precision geared products in robots,” said IMS Research Analyst Bryan Turnbough. “Chinese manufactures tend to be more focused on the cost of the system than achieving the highest degree of precision. Although China’s automotive industry continues to grow strongly, Japanese suppliers of industrial robots that use precision geared products are finding it harder to compete as effectively with Chinese hydraulic industrial robot manufacturers in the region.”

Precision gearbox and geared motor shipments into industry sectors such as materials handling, woodworking and printing are also expected to grow at a slower pace in 2013 following the fulfillment of pent-up demand that resulted from the 2009 recession. Although precision geared product shipments to the food, beverage and tobacco industries are expected to decline in 2013, positive signs of economic growth in the Eurozone and China could mean further growth of precision geared product sales from 2014 to 2016.

“The future performance of the precision geared products market will depend greatly on what happens in 2013,” said Turnbough. “If current global economic conditions persist then it could mean further deceleration in precision geared product shipments for several years because of the psychological impact that this slow recovery is having on industrial equipment end-users and OEMs. A bleak outlook makes it harder for them to invest in high-precision technology despite cost savings that could occur over time.”

Precision geared product manufacturers could see their shipment growth accelerate through 2016 if the Eurozone economy begins to strengthen and the United States or China has a marked rise in growth. Courtesy: IMS Research

Precision geared product sales to the robotics and machine tools industries, which accounted for approximately 39% of all precision geared products shipped this year, are forecast to grow at a mere 3.5% in 2013. However, the slowdown in these industry sectors is not projected to cause the total market for precision geared products to decline through 2016.

According to Turnbough, it is possible that precision geared product manufacturers could see their shipment growth accelerate through 2016 if the Eurozone economy begins to strengthen and the United States or China has a marked rise in growth.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me