Power semiconductor market to grow $9 billion over the next five years

The global power discrete and module market is forecast to grow by $9 billion to reach $26.2 billion in 2016, according to a new report from IMS Research.

07/26/2012


IHS has acquired IMS ResearchThe global power discrete and module market is forecast to grow by $9 billion to reach $26.2 billion in 2016, according to a new report from IMS Research, recently acquired by IHS Inc.. Following good growth in the first half of 2011, the market fell away in the second to finish with only 9% growth over the whole year. Although market conditions have remained flat in the first half of 2012, the longer-term prospects remain positive, stated the research firm.  

With revenues growing 9% from 2010, it is clear that 2011 was, at best, an average year for the power semiconductor market. This follows the dramatic market fall in 2009 and spectacular recovery in 2010, so perhaps the industry was ready for a “normal” year. However, with business confidence uncertain and the recovery stalling, what are the prospects for the future? According to IMS Research’s soon to be published report on Power Semiconductor Discretes and Modules, there remains cautious long-term optimism, with the market projected to grow by almost $9 billion to $26.2 billion from 2011 to 2016, a compound annual growth rate of 8%.

According to IMS Research, the market for power semiconductor modules again grew faster than that for discrete power semiconductors in 2010, increasing by 32% to close on $4.6 billion. The power module market growth is continuing in 2012 despite slowing demand, as reduced business confidence is felt in industrial market sectors. “Power module revenues are predicted to grow by 14% in 2012 , and to be 80% higher than in 2011 in 2016” stated Richard Eden, senior analyst and author of ‘The World Market for Power Semiconductor Discretes & Modules’.

The power discrete market was worth an estimated $12.9 billion in 2011, having grown by just over 2% from 2010. Continued high demand for discrete IGBTs accounted for nearly all the growth. “The sudden surge in discrete IGBT demand was fuelled by sales of   domestic appliances such as room air-conditioning and variable speed washing machines in the Chinese market,” added Eden. “In contrast, sales of standard power MOSFETs and thyristors actually declined slightly in 2011.”

A high proportion of discrete power semiconductors are used in relatively fast-moving commodity items such as flat-screen televisions, notebook computers and mobile phone adapters. Sales of these products depend heavily on consumer confidence and the health of the global economy. Sales of power semiconductors in those sectors either declined or achieved negligible growth in 2011, and are not forecast to deliver much growth in 2012. Power semiconductor market growth will therefore be driven by increased content, either to improve power conversion efficiency or add functionality. In contrast, growth is forecast to accelerate in the automotive, renewable energy and transportation sectors. Overall discrete power semiconductor market growth is predicted to remain less than 5% in 2012; the market is forecast to reach almost $18 billion in 2016.

The latest findings and analysis on this important market can be found in IMS Research’s “The World Market for Power Semiconductor Discretes & Modules 2012” report, due for publication in August 2012.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me