Potential net-energy metering rollbacks won't impact solar markets in U.S. states in 2014

Despite efforts from some U.S. states to re-evaluate their net-energy metering policies, the impact of any potential changes on the U.S. photovoltaics industry is expected to be negligible in 2014, according to IHS Inc.

01/10/2014


Despite efforts from some U.S. states to re-evaluate their net-energy metering (NEM) policies, the impact of any potential changes on the U.S. photovoltaics (PV) industry is expected to be negligible in 2014, according to IHS Inc.

"States including Arizona, Colorado and California are re-evaluating their NEM policies," said Wade Shafer, senior analyst covering North American PV at IHS. "This has spurred some concern about the development of distributed solar in the U.S., since NEM incentives are critical to supporting the customer-sited PV market. After examining proposed changes and recent utility commission rulings, IHS has determined that net metered PV project economics will not be significantly impacted in 2014."

IHS estimates that 85% of distributed solar PV capacity installed to date in the U.S. is located in states with full retail-rate NEM, according to an IHS report, US Debates Rolling Back Net Energy Metering. An estimated 70% is located in states that are reviewing their NEM policies.

Share of U.S. installed commercial and residential PV capacity located in states with full retail rate NEM vs. states that are reviewing NEM policies. Source: IHS Inc.

NEM schemes typically credit utility customers with solar PV systems at the full retail rate for the power they produce. Effectively, customers are able to roll back their utility bills with the credits from those they have earned for PV generation. NEM customers pay only for the net amount of electricity used, after subtracting the PV generation from their bills, which could potentially trigger a payment from the utility.

The debate in Arizona, Colorado and California has focused on determining the value of NEM PV power to non-NEM ratepayers and how to recover the difference, if any, between the retail rate and this value.

Solar debate heats up in Arizona

The Arizona Corporation Commission (ACC) in November ruled that beginning in 2014, new residential customers of Arizona Public Service Co. (APS) must pay a monthly fee of $0.70/kW of solar PV installed. More extensive NEM reforms were postponed until APS's 2015 general rate case.

This decision follows the request of APS in July to either compensate residential NEM at wholesale power prices—i.e., $40/MWh—or impose a fixed demand charge equivalent to $13.50/kW per month in the summer and $9.30/kW per month in the winter. APS argues that these changes would have better reflected NEM solar's estimated avoided cost value of $54/MWh.

Proposed reform in Colorado casts shadow over NEM solar

Electric power utility Xcel Energy Inc. in July petitioned the Colorado Public Utilities Commission to allocate all of the unrecovered costs from NEM solar PV generators to its Renewable Energy Standard Adjustment (RESA) charge. This charge to customer bills covers the incremental cost of compliance with Colorado's Renewable Energy Standard (RES).

Xcel estimates that when it credits residential NEM solar generation at the full retail rate, it provides a subsidy of $59/MWh to these NEM customers. The subsidy represents the gap between the average retail rate of $104/MWh and Xcel’s estimate of distributed solar generation’s system-wide average value of $45/MWh in avoided costs.

How much is the California sun worth?

The California Public Utility Commission (CPUC) in October released a study on the cost and benefits of NEM PV for non-NEM ratepayers. Similar to APS and Xcel, the study used an avoided-cost methodology to determine NEM benefits for non-NEM ratepayers. The study argued that in 2014, the average benefit provided by NEM PV will be approximately $111/MWh.

The debate over avoided costs

"The proceedings in Arizona, Colorado, and California all indicate that avoided utility costs are emerging as the way to determine NEM PV's value. However, with no single methodology for determining avoided costs, the debate over NEM benefits to the greater power system are likely to continue. Given that Arizona is currently positioned for NEM reform in 2015 and that California must create a new NEM tariff by 2016, the arguments are likely to continue through 2014 and 2015."

Avoided fuel costs, a portion of capacity, and avoided distribution losses seem to be common areas of value, but what percentage of these utility-cost categories are avoided will be debated.

Other categories that are likely to be the subject of debate are avoided transmission and distribution investments, renewable power purchases and emissions. In addition to these debates being shaped by local power market dynamics, the local political environment will also influence the final determinations and lead to fragmented outcomes across the U.S.

NEM policy changes have minimal impact in 2014

The distributed PV industry in the U.S. should largely be unaffected by NEM policy changes in 2014.

California has a full retail-rate NEM program in place until the state reaches its 5.3 GW aggregate limit on NEM capacity. At the end of the third quarter of 2013, the state’s utilities reported 1.7 GW of interconnected NEM capacity.

The ACC's $0.70 per kW of NEM PV charge should have negligible impact on NEM PV project economics.

Meanwhile, Colorado will continue to be a market dependent on local incentives.

Overall, developers should be mindful of the evolving avoided-cost framework and prepare for eventual reforms in NEM that move away from the full retail rate to a tariff based on the benefits that NEM PV provides to non-NEM customers. For their part, regulators seem to recognize a cost shift occurring between NEM and non-NEM customers, even though its magnitude is undecided.

Distributed solar developers should continue to focus on driving project costs lower through improved installation, streamlined customer acquisition, and innovative financing/business models, in order to prepare for a future of avoided cost valuations. With utility costs generally seen as increasing over time and PV costs expected to continue to decline, the future of distributed PV generation could be promising in select areas.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me