PMI stumbles to 51.1% in August over global concerns

Despite some optimism, index drops to lowest level since May 2013 amid concerns with global economy.

09/01/2015


The Institute for Supply Management's (ISM) Purchasing Managers' Index (PMI) fell to 51.1% in August, down from 52.7% in July. Courtesy: CFE Media File ImageThe August decline of the monthly Purchasing Manufacturers' Index (PMI) from the Institute for Supply Management (ISM) reflected the general malaise in the global markets. Even though the underlying growth in the manufacturing sector continues, the drop of 1.6 percentage points proves there are plenty of frayed nerves.

The PMI fell to 51.1% in August, down from July's 52.7% reading and the lowest level for the PMI since a 50.1% reading in May 2013. The index had slipped as low as 51.5% in March and April of 2015 before rallying over the summer. The news didn't help a stock market already shaken by news of a slowdown in the Chinese economy. By 9:30 a.m. CST on Sept. 1, the Dow Jones Industrial Average (DJIA)
had fallen more than 400 points.

All major indices that make up the PMI were lower in August, including a 4.8 percentage point drop in the New Order Index to 51.7% and a fall of 2.4 percentage points in the Production Index to 53.6%.

While any figure above 50% in the PMI indicates growth in manufacturing ISM manufacturing business survey committee chairman Bradley Holcomb said the global markets were weighing on the survey committee. "Comments from the panel reflect a mix of modest to strong growth depending upon the specific industry, the positive impact of lower raw materials prices, but also a continuing concern over export growth," said Holcomb in a press release. Among the comments from committee members:

  • "Falling crude oil prices are benefiting all resin based purchases as well as positively impacting fuel surcharges for inbound products." (Food, Beverage & Tobacco Products)
  • "We are oversold." (Paper Products)
  • "Business is still strong but has slowed slightly." (Transportation Equipment)
  • "Modest growth slightly ahead of GDP. Optimistic for the remainder of the year as we have little international exposure." (Chemical Products)
  • "(Foreign Exchange) continues to be a challenge, especially in Europe. Overall though, the mood is fairly upbeat regarding (the second half of 2015) as we ramp up for a new product launch." (Computer & Electronic Products)
  • "Our business is good due to the increase in commercial construction." (Fabricated Metal Products)
  • "Raw metals price decreases will impact our business favorably." (Miscellaneous Manufacturing)
  • "Business is guarded but steady. Margins are tight. Markets are very competitive. China is lackluster." (Wood Products)
  • "Automotive companies are investing heavily in upgrading their equipment." (Machinery)

- Bob Vavra is content manager, Plant Engineering, CFE Media, bvavra@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me