PMI steadies itself in January reading

ISM Index climbs to 48.2% to end a six-month slide as oil prices affect manufacturing sector growth.

02/01/2016


ISM Index climbs to 48.2% to end a six-month slide as oil prices affect manufacturing sector growth. CFE Media file photoThe Institute for Supply Management's (ISM) monthly PMI Index rose slightly in January, but remained under the 50% threshold for manufacturing expansion for the fourth consecutive month.

The PMI Index was at 48.2% in January, but given that the Index had declined for the previous six months to a low in December of 48.0%, any halt of that streak might be seen as a good sign. For Bradley Holcomb, chairman of the ISM Business Supply Committee, it was at least a mixed bag of news as the new year began.

"Comments from the panel indicate a mix ranging from strong to soft orders, as eight of our 18 industries report an increase in orders, and seven industries report a decrease in orders," Holcomb said.

While January's stock market decline didn't factor in the overall numbers, the drop in oil and gas prices continue to provide threats and obstacles for companies. "The oil and gas sector continues to be challenged by low oil and gas prices," said one committee member in that sector. "Risk of suppliers filing for bankruptcy and reducing their workforce is becoming an increasing risk. Our company workforce is also declining."

However, some companies are benefiting from reduced oil prices. A committee member in chemical products noted, "Business this month is better than last month and better than this period last year. Reduced oil and basic chemical prices providing favorable margin comparisons."

Among the comments from other sectors:

  • "Huge rollout in wireless in 2016 across all markets. We should be very, very busy." (Computer & Electronic Products)
  • "We are a bit slower, but staying busy." (Fabricated Metal Products)
  • "Business is still strong, but slowing." (Transportation Equipment)
  • "2016 starting off with strong orders." (Primary Metals)
  • "Market is sluggish to start the year." (Wood Products)
  • "Medical device continues to be strong." (Miscellaneous Manufacturing)
  • "Overall demand is higher than expected for post-holiday season." (Plastics & Rubber Products)
  • "Much worldwide macroeconomic uncertainty affecting our business. Business confidence seems low." (Food, Beverage & Tobacco Products)

Some of the underlying indexes showed solid growth in January. In particular, the New Orders Index rose 2.7 percentage points to 51.5% and the Production Index moved back into growth after two months of contraction with 50.2%.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me