PMI jumps to 12-month high as optimism abounds

Concerns over global unrest don’t show up in July, as index hits 57.1%

08/01/2014


Shrugging off the global political issues and focusing on continuing firming of the domestic economy, the monthly PMI Index from the Institute for Supply Management posted its largest one-month increase since February.

The July PMI jumped to 57.1%, increasing 1.8 percentage points from June's 55.3% figure. In February, the PMI went from 51.3% to 53.2%, kicking off what has been a steady growth after a January plunge blamed largely on the brutal North American winter. The PMI is now back above its 12-month high of 57.0% in November 2013.

"Comments from the panel are generally positive, while some indicate concern over global geopolitical situations," said Bradley J. Holcomb, chairman of the ISM's Manufacturing Business Survey Committee, in a press release. He noted that new order, production and employment all grew by more than 1 percentage point in July as all aspects of manufacturing continued to accelerate. Of the 18 industries studied by ISM each month, 17 showed growth in July.

The Institute for Supply Management's PMI Index jumped to 57.1%, increasing 1.8 percentage points from June's 55.3% figure. Courtesy: Institute for Supply ManagementComments from committee members quoted in the release reflected that optimism:

  • "Status quo...sales are okay (not great). Costs are generally flat." (Food, Beverage & Tobacco Products)
  • "We see slow growth in business as we see a slow growing economy." (Fabricated Metal Products)
  • "Business is still very good and we are very optimistic for the rest of the year." (Transportation Equipment)
  • "Bookings down, but shipments strong." (Electrical Equipment, Appliances & Components)
  • "Overall business conditions still good in our industry." (Computer & Electronic Products)
  • "Geopolitics still present a considerable risk as well as the European market." (Chemical Products)
  • "Contractors are very busy. Difficult time getting many to bid, especially electrical." (Paper Products)
  • "Salaries for engineering labor continue to increase above general inflation due to market competition and shortages in certain specialty skills." (Petroleum & Coal Products)
  • "Economy shows many signs of strength." (Machinery)
  • "Russia's demand for medical devices from the U.S. has dropped by 40 percent." (Miscellaneous Manufacturing)

The PMI has maintained is 62-month streak of growth over 43.2%, the statistical threshold for overall economy growth. July marked the 13th straight month of growing above the PMI's baseline of 50%.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me