PMI Index: Steady, but slower manufacturing growth

Index declines for third straight month, but stays above growth threshold

05/01/2013


Manufacturing continues its slow growth in April, according to the monthly PMI Index from the Institute of Supply Management. While April’s 50.7% level was above the 50% threshold for growth, it was the third straight month of slower growth after the index peaked at 54.2% in February. Still, the index has been at or above the break-even point for all but one month in the last year, indicating a consistent if unspectacular growth rate.

Of the 18 reporting industry segments, 14 reported growth for the month.  “The PMI registered 50.7% a decrease of 0.6 percentage points from March's reading of 51.3% indicating expansion in manufacturing for the fifth consecutive month, but at the lowest rate of the year,” said Bradley J. Holcomb, chair of the Institute for Supply Management Manufacturing Business Survey Committee. “Comments from the panel indicate a range of strong/steady growth, to flat/declining volumes, depending upon the particular industry.”

Among the comments from industry executives:

"Business can be described as flat at best." (Food, Beverage & Tobacco Products)

"Production is still strong; several new projects to support alternative energy." (Primary Metals)

"Slight uptick in business, but overall continuing slowdown in defense due to budget/sequester." (Computer & Electronic Products)

"Automotive demand remains firm." (Fabricated Metal Products)

"Business continues at a steady pace." (Machinery)

"General business conditions and industrial markets remain strong." (Transportation Equipment)

The PMI was above the 42.2% mark for overall economic growth for the 47th consecutive month, pointing to manufacturing’s impact on overall economic growth. “The past relationship between the PMI and the overall economy indicates that the average PMI for January through April (52.3%) corresponds to a 3.2% increase in real gross domestic product on an annualized basis,” Holcomb said. “In addition, if the PMI for April (50.7%) is annualized, it corresponds to a 2.7% increase in real GDP annually.”



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me