PMA Business report sees a summer slump coming

Association blames global instability, lack of U.S. government action

06/15/2012


According to the June 2012 Precision Metalforming Association Business Conditions Report, metalforming companies expect a significant decline in business conditions during the next three months.  Conducted monthly, the report is an economic indicator for manufacturing, sampling 114 metalforming companies in the United States and Canada.

 

The June report shows that only 11% of participants anticipate economic activity will improve during the next three months (down from 24% in May), 57% predict that activity will remain unchanged (compared to 60% last month) and 32% report that activity will decline (up substantially from 16% in May).

 

PMA officials said that while business generally has been better than in 2011, concerns over domestic and global issues are creating concern. “PMA member companies have generally experienced growth in 2012 vs. 2011, with average orders for the period of January to April up 9% year-over-year and shipments up 11% over the same period,” said William E. Gaskin, PMA president. “However, the outlook expressed in the June 2012 Business Conditions Survey reflects the soft business conditions created by economic uncertainty related to the European monetary crisis, confusion in the United States about health care and tax policy (including the massive tax increases threatened at year-end), and the lack of leadership by the President and Congress in addressing our own looming debt crisis.

 

 “While politicians increasingly speak about the importance of a strong manufacturing economy, little concrete action has been taken to adopt pro-manufacturing policies or to reduce the cost of regulations,” he added. “Manufacturing continues to lead the modest growth in the U.S. economy, including consistent growth in jobs; however the recovery is definitely in jeopardy as reflected by PMA’s June report.  It is time for the President and Congress to set aside political interests and take concrete actions to support job growth, economic recovery and fiscal prudence.”

 

Metalforming companies also forecast a downward trend in incoming orders during the next three months, with only 15% anticipating an increase in orders (compared to 34% in May), 52% expecting no change (up from 46% in May) and 33% predicting a decrease in orders (up from 20%  last month).

 

Average daily shipping levels declined in June.  Thirty-one% of participants report that shipping levels are above levels of three months ago (down from 37% in May), 39% report that shipping levels are the same as three months ago (compared to 44% last month), and 30% report a decrease in shipping levels (up from 19% in May).

 

The percentage of metalforming companies with a portion of their workforce on short time or layoff increased to 14% in June, up from 10% in May.  The June figure is the same as it was one year ago.

 

The monthly Business Conditions Report has been conducted by PMA since 1979.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2017 Top Plant.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
March 2018
SCCR, 2018 Maintenance study, and VFDs in a washdown environment.
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
December 2017
Product of the Year winners, Pattern recognition, Engineering analytics, Revitalize older pump installations
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Industrial Analytics
This digital report explains how plant engineers and subject matter experts (SME) need support for time series data and its many challenges.
IIoT: Operations & IT
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me