Plants safe, but need work

The NRC’s resident inspectors were sent to every U.S. nuclear power plant to examine the plants’ Severe Accident Management Guideline, which should contain or reduce the impact of accidents that damage a reactor core.

07/13/2011


Inspection results are in for the 104 operating U.S. nuclear power reactors, regarding their guidelines for continuing to protect the public even if accidents were to damage their reactor cores, said Nuclear Regulatory Commission officials.

“While overall we believe plants are safe and all of the NRC’s efforts aim to ensure the plants never need to use these guidelines, we are concerned that our inspectors found many of the plants have work to do in either training their staff on these procedures or ensuring the guidelines are appropriately updated,” said Eric Leeds, director of the NRC’s Office of Nuclear Reactor Regulation.

The NRC carried out the Severe Accident Management Guideline (SAMG) inspections at the request of the agency task force examining the lessons learned from the March 11 earthquake and tsunami in Japan, and the resulting damage to the Fukushima nuclear power plant.

The NRC directed its resident inspectors at every U.S. nuclear power plant to examine the plants’ SAMGs, which should contain or reduce the impact of accidents that damage a reactor core. All plants put these guidelines in place voluntarily in the late 1990s.

The resident inspectors examined where the plants keep the SAMGs, how they update guidelines and how plants train their personnel to carry out the guidelines.

The inspectors found all plants have implemented the guidelines, with 97 percent of the plants keeping SAMG documents in their Technical Support Center, generally considered the best location for properly implementing the guidelines.

The inspectors found SAMGs in 89 percent of plant control rooms, and in 71 percent of plant Emergency Operations Facilities. Only 42 percent of the plants, however, presently include SAMGs in their periodic review/revision procedures. The inspectors found staff at 92 percent of the plants received initial training on SAMGs. When examining how the plants exercise carrying out SAMGs, the inspectors found only 61 percent of the plants periodically include the guidelines in their emergency drills.

The NRC’s task force will incorporate the SAMG inspection results into its short-term review to help determine if they need any immediate changes to NRC requirements in light of events at Fukushima. The inspection results will also help inform the NRC’s long-term review of possible revisions to agency licensing and oversight processes.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
February 2018
Focus on power systems, process safety, electrical and power systems, edge computing in the oil & gas industry
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
April 2018
Implementing a DCS, stepper motors, intelligent motion control, remote monitoring of irrigation systems
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
Maintenance & Safety
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me