Plant Engineering Energy Study: Less than half of manufacturers conduct energy audits

According to a energy survey by Plant Engineering, only 47% of facilities conduct an annual energy audit

07/26/2013


Plant Engineering 2013 Energy Management ReportEnergy is the largest cost area for many manufacturers, yet fewer than half of manufacturing facilities conduct even an annual energy audit. That is the key finding from Plant Engineering’s recent research study of U.S. manufacturers. The full report is now available here.

The survey found that just 47% of facilities conduct even an annual energy audit of their plants. While just over a quarter of those respondents perform an energy audit annually, only 5% conduct an audit twice a year, and 9% conduct an audit quarterly.

"Energy is a raw material, like steel, plastic, and other materials that go into making a finished manufacturing product. We think it is unlikely manufacturers would not audit the materials that come into their facility. Yet that appears to be happening with energy in many plants in America today," said Plant Engineering content manager Bob Vavra. "Manufacturers who do not understand their energy usage in all areas are missing a huge opportunity to better manage their overall costs and deliver greater savings and profits."

Plant managers cite a lack of management support—including financial support—as the primary challenge in building an energy management program. The survey found 33% of plant managers said a lack of resources was the primary barrier to a program, while 19% cited a lack of buy-in from management and 13% said there was a problem with calculating the ROI of such a project. Just 15% said the biggest problem was a lack of buy-in from line workers.

Despite this, most plants have an aggressive energy reduction goal, and most expect to meet those goals. More than 70% of plants have an energy reduction goal of at least 10%, and 5% have a goal of more than 20%. More important, 89% of plant managers said they believed their energy management goals were achievable. Those cost savings do not translate into greater compensation for the plant manager, but just 22% of plant managers are compensated for achieving energy management goals.

Utilities have emerged as a key partner in energy management programs, and most plants understand the value of that relationship. Two-thirds of plant managers said they work with local utilities on energy management, and 78% cite the utilities as a valued partner. Of those plants which don’t work with a utility, 46% said they were unaware their provider had a program and 33% said they didn’t consider themselves a large enough customer to be in the program.

"It’s clear that all parties involved in industrial energy management need to do a better job educating the end users on the value of a sound energy management program," Vavra said. "Utilities need to continue their outreach to industrial users of all sizes. Manufacturing suppliers must continue to explain how the combination of energy audits and energy management systems can help plants get a true understanding of their energy use. Plant managers must have a better understanding of the ROI of energy management and be able to effectively carry that message throughout their organization."

Alternative energy sources have gained some attention, but most are still not in widespread use. Co-generation is used by 21% of plants, with solar (13%) and wind power (9%) each having some use. Still, 49% of plant managers said they do not use any alternative fuel sources.

The survey was conducted by Plant Engineering June 14-23, 2013, to better understand the areas of responsibility and challenges plant managers face when it comes to measuring and monitoring energy consumption. The survey looked at the various kinds of energy sources, including electrical, compressed air, and natural gas, and the energy management programs for each source. It also looked at how manufacturers are working with local utilities on energy conservation programs, as well as manufacturers’ use of alternative fuel sources.

To download the full report, click here



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me