Plant Engineering 2018 Maintenance Study

7 key findings on facility maintenance

03/01/2018


Source: Plant EngineeringRespondents to the Plant Engineering 2018 Maintenance Study identified seven important, high-level findings impacting the manufacturing industries today:

  1. Maintenance strategies: Eight in 10 manufacturing facilities follow a preventive maintenance strategy; 57% use a run-to-failure method and 51% practice a predictive maintenance (PdM) approach using analytical tools.

  2. Scheduled maintenance: Fifty-two percent of facilities allocate up to 10% of their annual operating costs to maintenance processes; 35% devote more than 10% of this budget on maintenance. The average facility spends 19 hours each week on schedule maintenance.

  3. Attention to systems: Rotating equipment (motors, power transmission, etc.) and plant automation systems are the two areas where facilities dedicate the most maintenance support, followed by fluid power systems, internal electrical distribution systems, and material handling equipment.

  4. Unscheduled downtime: The leading cause of unscheduled downtime within respondents’ facilities remains aging equipment (44%), followed by operator error (16%) and lack of time (15%). Half of facilities plan to upgrade their equipment and improve/increase training.

  5. Training: Maintenance teams are mostly trained on safety (84%) and basic electrical (68%) and mechanical skills (67%). Other types of training include preventive maintenance (58%) and lubrication (57%).

  6. Technologies: The most common technologies facilities use to monitor/manage maintenance are in-house spreadsheets/schedules (55%), computerized maintenance management systems (CMMS, 53%), and paper records of maintenance reports (44%).

  7. Outsourcing: The average facility outsources 20% of their maintenance operations, and the leading causes are lack of time/manpower and lack of skills among current staff.

Access the full 2018 Maintenance report to view additional findings.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
GAMS preview, 2018 Mid-Year Report, EAM and Safety
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me