Plant Engineering 2014 Workforce Development Study: 6 key findings

According to the data in this report, 66% of manufacturing facilities are experiencing a skilled workforce shortage, and an average of 7% of jobs within plants are unfilled because of it. See what actions are being taken to close this gap and improve manufacturing's appeal to the younger generations.

07/22/2014


In June 2014, more than 200 plant engineers and managers within the Plant Engineering audience responded to the 2014 Workforce Development study. The study asked key questions on the causes and effects of the lack of a skilled workforce in the U.S., what manufacturing plants are doing to combat this issue, and how facilities are establishing a positive relationship with their communities.

Plant Engineering sees the following six high-level findings to be important factors that are impacting the manufacturing industry today:

  1. Workforce shortage: Nearly two-thirds of respondents indicated a workforce shortage within their plants, and within those facilities, 7% of jobs are currently unfilled, on average. 63% agree that the shortage will only increase within the next three to five years.

  2. Causes: When asked about the primary cause of the workforce shortage within their plants, 68% said they are having trouble finding qualified applicants among the new workforce, and only 12% cited a lack of finances to seek workers and fill positions.

  3. Unskilled workforce: According to respondents, the younger workforce lacks project management (62%), engineering (53%), and team-building skills (48%), but they are quite proficient in computer skills (76%).

  4. Actions taken: In an effort to combat the shortage, 50% of plants have taken to online recruitment and 37% offer in-house training for less experienced applicants.

  5. Manufacturing’s image: Half of respondents don’t believe that manufacturing is portrayed as a positive career choice in the U.S. More than half agree that introducing manufacturing at an earlier education level, incorporating apprenticeship programs, and improved salaries, benefits, and job security would improve manufacturing’s image.

  6. Community outreach: Eight-one percent of respondents think their manufacturing plants are seen as positive lights in their respective communities, and more than 40% maintain this status by hosting or volunteering for local events and by being active members of their local Chamber of Commerce. 

Access the full Plant Engineering 2014 Workforce Development report with additional findings and insights.

Amanda McLeman is director of research at CFE Media,
Plant Engineering.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
October 2018
Tools vs. sensors, functional safety, compressor rental, an operational network of maintenance and safety
September 2018
2018 Engineering Leaders under 40, Women in Engineering, Six ways to reduce waste in manufacturing, and Four robot implementation challenges.
July/Aug
GAMS preview, 2018 Mid-Year Report, EAM and Safety
October 2018
2018 Product of the Year; Subsurface data methodologies; Digital twins; Well lifecycle data
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
October 2018
Complex upgrades for system integrators; Process control safety and compliance
September 2018
Effective process analytics; Four reasons why LTE networks are not IIoT ready

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
Design of Safe and Reliable Hydraulic Systems for Subsea Applications
This eGuide explains how the operation of hydraulic systems for subsea applications requires the user to consider additional aspects because of the unique conditions that apply to the setting
click me