Piloting your way through the danger zone

Piloting your way through the danger zone: A look at learning to be a Jedi.

01/08/2016


Piloting your way through the danger zone: A look at learning to be a Jedi. Courtesy: EruditioLearning has many variables and paths that you might follow as you travel to mastery of a skill. The skill could be one of mathematics, problem solving, or even being a pilot or a Jedi. 

While this graphic is only a learning model, we can see three distinct zones that could yield interesting thoughts as one analyzes the concept of learning.

The first phase is the Beginner Zone

Here you find yourself excited to learn and with so little knowledge of the topic that you don't even know what transferable skills or talents apply to this learning quest. With this said, you may underestimate what you know and how much there is to know on the topic. You will be fixated on acquiring knowledge and teachers to guide you.

The second phase is the Danger Zone

As time or as expertise grows, you will transition into the danger zone. Here, some students believe they no longer need their teacher or sensei. They believe they are better and more knowledgeable than the master that trained them. You can see this zone characterized in the movie Star Wars, Attack of the Clones where Anakin Skywalker (soon to be Darth Vader) began to believe he was better than the Jedi Expert and Sensei Obi Wan. This misunderstanding cost him his hand and led him to the dark side. We also see this Danger Zone in aviation around the 250 hour of experience mark. At this point a lot of pilots begin to feel too comfortable in the airplane. They skip checklists and tend to get a little gutsy with their personal flight limits. Sooner or later, it catches up to them and they are either scared straight or wind up as an National Transportation Safety Board (NTSB) report. The Federal Aviation Administration accidents statistics also support the danger found in this zone. In the work place or on the conference scene this zone is demonstrated by the "know it alls" that want the world to see that they are "experts" with out the understanding to realize what they do not know on the topic. The point is if you do not recognize this phase it could cost you your hand, your career, or your life.

The third phase is the Expert Zone

At some level of maturity the learner realizes that what he or she knows is only a trace of the knowledge that exist in the area of study. This "humblization" of the learner allows them to transition to the Expert Zone. In Malcolm Gladwell 2008 book "Outliers," he wrote that "ten thousand hours is the magic number of greatness." Now we know that not everyone will be an virtuoso at everything by 10,000 hours but I would contend that they stand a good chance of being in the expert zone. They know many if not most of the areas of the body of knowledge (BOK) and they can see that there is so much to learn about each of those elements of that BOK. They continue to strive to learn and grow in the topic as they travel this zone.

Where are you with the items your are studying. Are you in the Danger Zone in any of your pursuits?

May the force be with you on your learning journey and be safe young Jedi.

-Shon Isenhour is a founding partner at Eruditio. This article originally appeared on ReliabilityNOW.  Eruditio is a CFE Media content partner. Edited by Erin Dunne, production coordinator, CFE Media, edunne@cfemedia.com.



Top Plant
The Top Plant program honors outstanding manufacturing facilities in North America.
Product of the Year
The Product of the Year program recognizes products newly released in the manufacturing industries.
System Integrator of the Year
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
June 2018
2018 Lubrication Guide, Motor and maintenance management, Control system migration
May 2018
Electrical standards, robots and Lean manufacturing, and how an aluminum packaging plant is helping community growth.
April 2018
2017 Product of the Year winners, retrofitting a press, IMTS and Hannover Messe preview, natural refrigerants, testing steam traps
August 2018
SCADA standardization, capital expenditures, data-driven drilling and execution
June 2018
Machine learning, produced water benefits, programming cavity pumps
April 2018
ROVs, rigs, and the real time; wellsite valve manifolds; AI on a chip; analytics use for pipelines
Spring 2018
Burners for heat-treating furnaces, CHP, dryers, gas humidification, and more
August 2018
Choosing an automation controller, Lean manufacturing
February 2018
Setting internal automation standards

Annual Salary Survey

After two years of economic concerns, manufacturing leaders once again have homed in on the single biggest issue facing their operations:

It's the workers—or more specifically, the lack of workers.

The 2017 Plant Engineering Salary Survey looks at not just what plant managers make, but what they think. As they look across their plants today, plant managers say they don’t have the operational depth to take on the new technologies and new challenges of global manufacturing.

Read more: 2017 Salary Survey

The Maintenance and Reliability Coach's blog
Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
One Voice for Manufacturing
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Maintenance and Reliability Professionals Blog
The Society for Maintenance and Reliability Professionals an organization devoted...
Machine Safety
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
Research Analyst Blog
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Marshall on Maintenance
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
Lachance on CMMS
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Material Handling
This digital report explains how everything from conveyors and robots to automatic picking systems and digital orders have evolved to keep pace with the speed of change in the supply chain.
Electrical Safety Update
This digital report explains how plant engineers need to take greater care when it comes to electrical safety incidents on the plant floor.
IIoT: Machines, Equipment, & Asset Management
Articles in this digital report highlight technologies that enable Industrial Internet of Things, IIoT-related products and strategies.
Randy Steele
Maintenance Manager; California Oils Corp.
Matthew J. Woo, PE, RCDD, LEED AP BD+C
Associate, Electrical Engineering; Wood Harbinger
Randy Oliver
Control Systems Engineer; Robert Bosch Corp.
Data Centers: Impacts of Climate and Cooling Technology
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
Safety First: Arc Flash 101
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
Critical Power: Hospital Electrical Systems
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me